Is Tap Water Safe to Drink in Baltimore?
Check current notices first: the EPA record for the City of Baltimore lists an open contaminant-limit violation.
What does Baltimore’s tap water record mean?
The open violation is associated with total trihalomethanes, a group of disinfection byproducts. Check the City of Baltimore’s current water notices for instructions before deciding how to use tap water. For a broader comparison, see tap water safety by state.
A violation of a maximum contaminant level means a drinking-water limit was exceeded under the applicable rule. It does not, by itself, tell you the concentration in a particular glass of water or whether there is an immediate health risk. The utility’s notice and annual water quality report are the places to check for current details.
Who supplies Baltimore’s water, and where does it come from?
The City of Baltimore is the local-government-owned water utility listed in EPA records. Its primary source is surface water, and the system serves approximately 1,600,000 people.
The system-wide record describes the utility’s water, not necessarily the water at every individual tap. Plumbing within a home or building can affect water after it leaves the utility’s system.
What does the EPA violation record show for the last three years?
| System | People served | Health-based violations | Open violations | Lead action-level exceedances |
|---|---|---|---|---|
| City of Baltimore | 1,600,000 | None flagged | Yes: a contaminant-limit violation associated with total trihalomethanes | None reported |
The record flags no health-based violations for the three-year period, while also listing an open maximum contaminant level violation. It does not explain that difference; check the utility’s current notices for details.
The record also lists nitrate and total trihalomethanes in its three-year violation history. It includes monitoring and reporting violations, which concern missed or late tests or paperwork—not, by themselves, findings that water is contaminated. Violations were recorded in 5 of the last 12 quarters.
What did PFAS testing find in Baltimore’s water?
PFAS are often called “forever chemicals” because many persist in the environment. In EPA’s one-time national UCMR 5 survey, the City of Baltimore was sampled from August 15, 2024, through May 13, 2025.
| PFAS result | UCMR 5 finding | EPA limit |
|---|---|---|
| PFOA | Not detected in any of 12 samples; reporting limit was 4.0 parts per trillion (ppt) | 4.0 ppt |
| PFOS | Not detected in any of 12 samples; reporting limit was 4.0 ppt | 4.0 ppt |
Across the other PFAS results, one of 276 reported results was detected, at 3.0 ppt. A result below the reporting limit is reported as “not detected”; it does not mean the amount was necessarily zero.
EPA has set limits of 4.0 ppt each for PFOA and PFOS. These survey results do not establish ongoing compliance: compliance is based on running annual averages, rather than a single result or a one-time survey. The findings come from EPA’s UCMR 5 occurrence data.
Could lead enter water through household plumbing?
Lead can enter water through service lines, fixtures or other plumbing. No lead action-level exceedances were reported for the City of Baltimore system in the three-year record, but that does not rule out lead at an individual tap.
Use cold tap water for drinking, cooking and preparing infant formula, and let water run after it has been sitting in the pipes. Boiling does not remove lead. A home water test can help answer questions about your particular tap.
Who should be careful, and when should they see a doctor?
Pregnant people, infants and young children warrant particular care around potential lead exposure. If you are concerned that a child has been exposed to lead, contact their pediatrician; a blood test may be appropriate. People with medical conditions who have concerns about their water can ask their clinician for individualized advice.
Can you use Baltimore tap water for ice, brushing teeth and washing produce?
Check the current City of Baltimore notice for instructions covering these uses. If a notice says not to use tap water for a particular purpose, follow it for ice, brushing teeth and washing produce as applicable.
If you have not checked the notice and want to avoid possible exposure in the meantime, you can use bottled water for those tasks. Do not assume that boiling addresses a chemical contaminant; follow the utility’s specific directions.
How can you get extra protection?
Testing can help identify a problem at your tap that a system-wide report cannot settle. Our guide to how to test water quality at home explains how to choose a test and collect a sample. Ask the utility about testing options and your service line if you are concerned about lead.
A filter may reduce specific contaminants, but not every filter removes the same substances. Look for independent certification for the contaminant you want to reduce, such as lead or total trihalomethanes, and follow the manufacturer’s cartridge-replacement instructions. Compare options in our guide to the best pitcher water filters.
A filter is not a substitute for following a current utility notice. Check that its certification covers the contaminant named in the notice before relying on it.
Where does this information come from?
The violation and system information comes from the EPA ECHO drinking-water report for the City of Baltimore, retrieved November 3, 2026. It is a snapshot and may not reflect later changes.
For current instructions and more detail, consult the City of Baltimore’s water notices and its annual water quality report. The PFAS findings come from EPA’s UCMR 5 occurrence data file dated October 15, 2026.
Frequently asked questions
What is the City of Baltimore water system’s EPA ID?
Its public water system ID is MD0300002.
What does one part per trillion mean in a water test?
One part per trillion is approximately one nanogram of a substance per liter of water.
Can clear water still contain lead?
Yes. Water can look clear and still contain lead; a suitable test is needed to check your tap.