Is Tap Water Safe to Drink in Arlington, Texas?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the City of Arlington had no health-based drinking water violations in the last three years of EPA records. That finding covers the utility’s water system, not the condition of every home’s plumbing.

What does Arlington’s tap water safety record show?

The EPA record is reassuring about the City of Arlington’s recent compliance with health-based drinking water requirements. It is not a guarantee that every tap is free of contaminants or that no advisory is currently in effect.

For current information, check the City of Arlington’s water notices and annual water quality report. You can also compare the broader picture in our guide to tap water safety by state.

Who supplies Arlington’s water, and where does it come from?

The City of Arlington is the local-government utility listed in EPA records for the water system. Its primary source is surface water, and the system is reported to serve 413,955 people.

If you are unsure which utility serves your address, check your water bill or ask your building manager. A different supplier’s record may apply outside the City of Arlington’s service area.

What does EPA’s three-year violation record show?

The table summarizes the City of Arlington system’s EPA record, retrieved November 3, 2026. An open violation is one listed as current in the record; a lead action-level exceedance is a separate measure from a health-based violation.

Water systemPeople servedHealth-based violations, last 3 yearsOpen violationsLead action-level exceedances, last 3 years
City of Arlington413,955NoneNone listedNone reported

No reported lead action-level exceedance does not mean every household tap has been tested or that lead is absent. The results also do not replace current utility notices.

What did PFAS testing find in Arlington’s water?

PFAS are a group of long-lasting chemicals often called “forever chemicals.” EPA’s fifth Unregulated Contaminant Monitoring Rule, or UCMR 5, was a national survey conducted during 2023–2025. The City of Arlington’s samples in the survey were collected from June 2023 through June 2024.

ChemicalUCMR 5 resultComparison
PFOSDetected in 3 of 8 samples; maximum 4.6 parts per trillion (ppt)Maximum was above EPA’s 4.0 ppt limit
PFOANot detected in 8 samples; reporting limit 4.0 pptEPA’s limit is 4.0 ppt
PFBSDetected in 6 of 8 samples; maximum 5.9 pptNot a comparison with the PFOA or PFOS limits

A result above the PFOS limit is worth noting, but the maximum sample result alone does not establish a compliance violation: compliance is based on running annual averages. “Not detected” means a result was below the reporting limit, not necessarily that none was present.

These findings come from EPA’s UCMR 5 occurrence data, using the file dated October 15, 2026. Check the utility’s annual report and notices for current information.

Could lead enter water from household plumbing?

Yes. Even with no reported system-level lead action-level exceedance, lead can enter water from service lines, plumbing, solder or fixtures. EPA’s lead health goal is zero; its current action level is 15 parts per billion (ppb), a system-level measure rather than a guarantee for an individual tap.

Use cold tap water for drinking, cooking and preparing infant formula. If water has been sitting in the plumbing, running the cold tap can reduce exposure, but flushing does not replace testing or remove a lead source.

Pregnant people, infants and young children are especially vulnerable to lead exposure. If you suspect exposure, ask a healthcare professional whether testing is appropriate; do not wait for symptoms to seek advice.

Can you use Arlington tap water for ice, brushing teeth and washing produce?

The EPA record does not indicate a recent health-based violation that would, by itself, rule out these routine uses. Still, the record cannot establish the condition of your own plumbing or whether a new local notice has been issued.

Check and follow any current utility advisory, including its instructions for making ice, brushing teeth and washing produce. Boiling does not remove lead or PFAS and can increase their concentration as water evaporates.

How can you get extra protection?

For information about your own tap, use a qualified laboratory and follow its sampling instructions. Ask for the specific tests you need, such as lead or PFAS; a general water test may not include both. Our guide to how to test water quality at home explains what to consider.

A filter can provide an additional barrier, but check its certification for the specific contaminant you want to reduce. Not every filter reduces lead or PFAS, and filters must be maintained and replaced according to the manufacturer’s instructions. See our guide to the best pitcher water filters when comparing options.

People with weakened immune systems should ask their healthcare professional whether they need additional water precautions. If a test suggests lead or another concerning contaminant, contact the utility or local health department for guidance as well as discussing health concerns with a clinician.

Where does the Arlington data come from?

The violation and system information comes from the EPA ECHO detailed facility report for the City of Arlington, retrieved November 3, 2026. The PFAS results come from EPA’s UCMR 5 occurrence dataset, which is separate from the violation record. For the latest local details, consult the City of Arlington’s notices and annual water quality report.

Frequently asked questions

Does clear water mean it contains no contaminants?

No. Some contaminants cannot be seen, so appearance alone cannot establish water quality. Testing is needed to measure a specific contaminant at your tap.

Can you detect PFAS by taste or smell?

Taste and smell are not reliable ways to determine whether PFAS are present. A laboratory test is needed to measure them.

What does parts per trillion mean in a water test?

Parts per trillion describes a very small concentration: one part of a substance per trillion parts of water. PFAS results are commonly reported in parts per trillion, abbreviated ppt.