Is Tap Water Safe to Drink in Ann Arbor?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Ann Arbor had no health-based violations in EPA’s last three-year record, although it had a reporting violation that is not proof of unsafe water.

What does the EPA verdict mean for Ann Arbor tap water?

The EPA record does not identify a health-based violation for Ann Arbor in the period reviewed. It does identify a reporting violation under the Lead and Copper Rule Revisions; reporting violations concern requirements such as paperwork and do not, by themselves, establish that water is contaminated.

The record describes the utility, not every household tap, and it cannot guarantee current conditions. Check Ann Arbor’s current utility notices and annual water quality report for updates. For a broader comparison, see tap water safety by state.

Who supplies Ann Arbor’s water, and where does it come from?

The Ann Arbor public water system is operated by local government and serves a reported 123,851 people. EPA identifies its primary source as surface water.

The system’s EPA identification number is MI0000220. If you are checking a bill or report, confirm that this is your water system; the city population and the number of people served by a utility are not necessarily the same.

What does the last three-year EPA violation record show?

SystemPeople servedHealth-based violationsOpen violationsLead action-level exceedances
Ann Arbor, MI0000220123,851None reportedLead and Copper Rule Revisions: reporting violationNone reported

EPA lists violations in four of the last 12 quarters and identifies one rule involved. The open violation is a reporting violation; the record does not establish that it resulted from a particular missed test or explain the circumstances. Consult the utility’s notices and annual water quality report for current details.

“None reported” for lead action-level exceedances describes the system’s record, not the lead level at an individual tap. It should not be read as a guarantee that every home is free of lead exposure.

What did EPA’s PFAS testing find?

PFAS, sometimes called “forever chemicals,” are a group of chemicals that can persist in the environment. EPA’s UCMR 5 survey tested Ann Arbor’s water from March 16 through December 18, 2023, as part of a national survey conducted from 2023 to 2025.

ChemicalAnn Arbor survey resultReporting limitEPA limit
PFOANot detected in 4 samples4.0 ppt4.0 ppt
PFOSNot detected in 4 samples4.0 ppt4.0 ppt

A result below the reporting limit is not the same as zero. EPA has set limits of 4.0 parts per trillion (ppt) for PFOA and PFOS individually, but these survey results alone do not establish current regulatory compliance, which is based on running annual averages.

Among results for other PFAS, 5 of 92 were detections, with a highest reported detection of 6.1 ppt. The PFOA and PFOS limits cannot be applied to that group as a whole. PFHxS, PFBS, PFNA and HFPO-DA, also called GenX, were not detected in their four samples each.

The survey is a snapshot rather than a current household test. See EPA’s UCMR 5 occurrence data and the utility’s latest report for more information.

Could lead come from household plumbing?

Yes. Lead can enter drinking water from a service line, solder or plumbing fixtures, so a utility-wide record cannot tell you the concentration at your kitchen tap. EPA’s lead action level is 15 parts per billion (ppb); its health goal for lead is zero. The action level is scheduled to fall to 10 ppb, with compliance from 2037.

Use cold tap water for drinking and cooking, and ask the utility or local health department about testing if you have or suspect lead plumbing. A household test is the way to check your own tap; follow the laboratory’s sampling instructions.

Infants, children and pregnant people warrant particular care when lead exposure is suspected. If you are concerned about exposure, especially when preparing infant formula, contact a clinician or local health department rather than waiting for symptoms.

Can you use the water for ice, brushing teeth and washing produce?

Drinking-quality tap water can generally be used for ice, brushing teeth and washing produce. The reporting violation alone is not evidence that these uses are unsafe, but the EPA record cannot rule out a current notice or a problem in your own plumbing.

Check and follow any current utility instructions before using the water for affected purposes. Do not assume boiling will remove lead or PFAS; it does not.

How can you get extra protection?

If you want information about your own tap, choose a qualified laboratory and ask which tests and sample-collection methods are appropriate. Lead and PFAS require different analyses. Our guide to how to test water quality at home explains how to plan a test.

For filtration, look for a product independently certified to NSF/ANSI 53 or 58 for the specific contaminants you want to reduce, such as lead, PFOA or PFOS. Certification claims differ by product, so check the exact model and replace cartridges according to its instructions. The best pitcher water filters guide covers options to consider.

A filter is not a substitute for following a utility notice. If a test shows a contaminant of concern, ask the utility, health department or a qualified professional how to interpret the result and what to do next.

Where does this information come from?

The violation information comes from EPA ECHO Safe Drinking Water Act data for Ann Arbor, retrieved November 3, 2026. You can review the EPA detailed facility report for the system.

The PFAS figures come from EPA’s UCMR 5 occurrence data, in a file dated October 15, 2026. Both sources describe recorded results rather than providing a live reading from your faucet; the utility’s notices and annual water quality report are important sources for current local information.

Frequently asked questions

What does ppt mean in a PFAS result?

Ppt means parts per trillion, a measure of concentration. A result of 4.0 ppt represents 4 parts of a substance per trillion parts of water.

What does PWSID mean?

PWSID stands for public water system identification number. Ann Arbor’s PWSID is MI0000220, which helps distinguish its EPA record from those of other systems.