Is Tap Water Safe to Drink in Allentown?

DetoxWater Editorial Team•Published November 5, 2026

Yes, LCA Allentown Division had no health-based violations in the last 3 years, although it had monitoring and reporting violations involving missed or late tests or paperwork, which do not prove the water was unsafe.

Is Allentown tap water safe to drink?

The EPA record supports that verdict for water supplied by LCA Allentown Division, but it does not guarantee the quality of water at every household tap. The record also does not replace current utility notices: check those before using water if an advisory has been issued.

For a broader comparison, see tap water safety by state.

Who supplies Allentown’s water, and where does it come from?

LCA Allentown Division is the local-government-owned system in the EPA record. It serves approximately 118,000 people and lists surface water as its primary source.

The EPA record identifies the source category but does not specify a particular body of water. Check the utility’s annual water quality report for more detail about the water serving your address.

What does the EPA violation record show for the last 3 years?

The following summarizes the LCA Allentown Division record retrieved on November 3, 2026. An open violation is one listed as current in that record; it is not the same as a current utility advisory.

EPA record itemLCA Allentown Division
Public water system IDPA3390024
People served118,000 people
Health-based violations in the last 3 yearsNone reported
Open violationsNone listed in the retrieved record
Quarters with violations in the last 12 quarters1 quarter
Lead action-level exceedances in the last 3 yearsNone reported

The violation category was monitoring and reporting. Those violations concern missed or late tests or paperwork; they are not, by themselves, evidence that the water was contaminated.

The record lists the Surface Water Treatment Rule, Groundwater Rule, total haloacetic acids and total trihalomethanes. The last two are groups of disinfection byproducts. Their appearance in the record does not by itself establish a health-based violation or show that a contaminant exceeded its limit.

What did PFAS testing find?

PFAS are persistent chemicals often called “forever chemicals.” In EPA’s one-time UCMR 5 national survey, LCA Allentown Division samples were collected from February 6 through November 14, 2023. Results are in parts per trillion (ppt).

ChemicalSurvey resultEPA limit
PFOANot detected in 8 samples; reporting limit was 4.0 ppt4.0 ppt
PFOSDetected in 1 of 8 samples; maximum was 4.4 ppt4.0 ppt

The maximum PFOS result was above EPA’s 4.0 ppt limit. That single maximum does not establish a violation: compliance is based on running annual averages, not one sample. EPA has set limits of 4.0 ppt for both PFOA and PFOS.

“Not detected” for PFOA does not mean zero; it means the testing did not report a detection at its reporting limit. These survey results also do not establish the PFAS level at a particular tap today. Check the utility’s notices and annual water quality report for current details.

Can household plumbing add lead to the water?

Yes. Lead can enter water from plumbing, fixtures or service lines, so a utility record with no reported lead action-level exceedances cannot tell you whether your own tap contains lead.

EPA’s lead action level is 15 parts per billion (ppb), and its health goal for lead is zero. The action level is a system-wide trigger for action, not a guarantee that an individual home has no lead.

Children and pregnant people are especially important to protect from lead exposure. If you suspect exposure, contact a health professional about whether testing is appropriate. If you have a weakened immune system, ask your clinician whether you need additional drinking-water precautions.

Can you use Allentown tap water for ice, brushing teeth and washing produce?

The EPA record supports ordinary use of LCA Allentown Division water for these purposes when no applicable advisory is in effect and there is no known household plumbing concern. If the utility issues a notice, follow its instructions for each use.

Ice is made from the water you put into it, so freezing does not remove lead or PFAS. If you are concerned about a contaminant at your tap, use water appropriate for drinking to make ice and wash produce while you check the issue.

How can you get extra protection?

For a household-specific answer, use a certified drinking-water laboratory and ask how to collect samples for the contaminants you want to check. Sampling instructions matter, particularly for lead. Our guide explains how to test water quality at home.

If you choose a filter, look for independent certification to reduce the specific contaminant of concern, such as lead, PFOA or PFOS. Check its performance information and follow the manufacturer’s cartridge-replacement instructions; not every filter removes every contaminant. Compare options in our guide to the best pitcher water filters.

Boiling does not remove lead or PFAS. Follow a boil-water notice when one applies, but do not rely on boiling as a remedy for chemical contamination.

Where does this information come from?

The violation and system details come from the EPA ECHO drinking water report for LCA Allentown Division, retrieved November 3, 2026. The PFAS results come from EPA’s UCMR 5 occurrence data, in a file dated October 15, 2026.

These records describe the utility system and past sampling, not every home’s plumbing or the latest conditions. For current details, consult LCA Allentown Division’s notices and annual water quality report.

Frequently asked questions

What does parts per trillion mean in a water test?

Parts per trillion, abbreviated ppt, expresses a very small concentration: one part of a substance per trillion parts of water.

Can you tell whether water contains PFAS by its taste or smell?

Taste and smell cannot reliably tell you whether PFAS are present. Laboratory testing is needed to measure them.