Is Tap Water Safe to Drink in Akron?

DetoxWater Editorial Team•Published November 5, 2026

Mostly yes, with caveats: the available record identifies a health-based violation at Akron City PWS in the past 3 years, with none listed as open now.

What does Akron’s tap water verdict mean?

The record lists a past maximum contaminant level violation involving total haloacetic acids, also called HAA5. These are disinfection byproducts. No violation is listed as open in the retrieved record, but that snapshot cannot establish conditions at every household tap or replace a current utility notice.

There is an inconsistency worth checking: the record’s three-year health-based violation flag says “No,” even though the verdict identifies a past health-based violation and the record lists the HAA5 maximum contaminant level violation. Consult the EPA report and Akron City PWS’s notices for clarification. For a broader comparison, see tap water safety by state.

Who supplies Akron’s water, and where does it come from?

Akron City PWS, identified in EPA records as AKRON CITY PWS, is a local-government-owned system. Its primary source is surface water, and the system serves approximately 280,000 people.

The EPA data used here do not name a specific source water body. Akron City PWS’s annual water quality report is the place to check for more detail about its supply and recent results.

What does the EPA violation record show?

The following is a snapshot of the EPA record retrieved on November 3, 2026. The violation history covers the preceding 3 years; it is not a test of an individual home’s plumbing.

SystemPeople servedHealth-based violations, 3-year flagOpen violationsLead action-level exceedances, 3 years
Akron City PWS280,000Flag says “No”; see discrepancy aboveNone listedNone reported

The record lists one rule violated and a violation in one of the last 12 quarters. It identifies the violation category as a maximum contaminant level violation for HAA5. One quarter is marked undetermined, so the history should not be read as a complete current clearance.

“None reported” for lead action-level exceedances describes the system record. It does not mean that lead is absent from every home’s tap water.

What did PFAS testing find?

PFAS are a group of chemicals often called “forever chemicals.” EPA’s UCMR 5 occurrence data include Akron City PWS samples collected from March 8 to December 5, 2023, as part of the national 2023–2025 monitoring program.

ChemicalDetectionMaximum reportedEPA limit
PFOADetected in 1 of 4 samples7.3 parts per trillion (ppt)4.0 ppt
PFOSDetected in 0 of 4 samplesNot detected at the 4.0 ppt reporting limit4.0 ppt

The highest PFOA result exceeded 4.0 ppt, but a single sample does not by itself establish a violation: compliance is based on running annual averages. EPA has set limits of 4.0 ppt for both PFOA and PFOS. “Not detected” for PFOS means it was below the reporting limit, not necessarily that none was present.

The same data report no detections of GenX, PFBS, PFNA or PFHxS in their four samples each. The data also group a detection as “any other PFAS”: 1 of 92 samples, with a maximum of 5.0 ppt; the specific chemical is not identified. Ask Akron City PWS for its latest results; the 2023 samples do not describe every later day of service.

Can lead come from household plumbing?

Yes. A utility-level record cannot rule out lead from a service line, solder or fixtures at a particular property. Lead exposure is especially concerning for children and during pregnancy.

EPA’s lead action level is 15 parts per billion (ppb), or 0.015 milligrams per liter (mg/L); its health goal is zero. An action level is used to assess system sampling results, not to guarantee that an individual tap is lead-free. EPA’s 2024 rule lowers the action level to 10 ppb, with compliance from 2037.

If you are concerned about your plumbing, ask Akron City PWS about your service line and arrange a tap-water test through a qualified laboratory. Use cold water for drinking and cooking; boiling does not remove lead.

Can you use the water for ice, brushing teeth and washing produce?

If there is no applicable advisory and you have no reason to suspect a problem with your plumbing, tap water is generally used for these tasks. Check current Akron City PWS notices first; the EPA snapshot does not verify conditions at your address today.

If you are concerned about lead or PFAS at your tap, use water tested or filtered for the contaminant of concern for drinking, making ice and preparing food. Follow any current advisory’s specific instructions for brushing teeth and washing produce. Boiling does not remove PFAS.

What extra protection can you use?

Start by checking the utility’s current notices and annual report, then consider testing if you need information about your own tap. Our guide to how to test water quality at home explains the options.

A filter can be useful when it is certified for the specific contaminant you want to reduce. Check the product’s certification and instructions for lead or the particular PFAS, and replace cartridges as directed; not every pitcher removes every contaminant. Compare the best pitcher water filters for features and certification details.

Pregnant people, parents of infants and young children, and anyone with a medical concern about possible exposure can ask a clinician or pediatrician about their circumstances. Seek medical advice if you are concerned that you or a child has been exposed to lead; do not rely on appearance or taste to assess it.

Where does the Akron water data come from?

The utility and violation information comes from EPA’s Safe Drinking Water Act data in the Akron City PWS detailed facility report, retrieved November 3, 2026. The PFAS figures come from EPA’s UCMR 5 occurrence data file dated October 15, 2026. For current local details, check Akron City PWS’s notices and annual water quality report.

Frequently asked questions

Does clear water mean it is free of contaminants?

No. Some contaminants cannot be detected by looking at, smelling or tasting water; testing is needed to identify them.

What does one part per trillion mean in water?

For water, one part per trillion is approximately one nanogram per liter.

Are PFAS and HAA5 the same thing?

No. PFAS are a group of chemicals, while HAA5 refers to five haloacetic acids that can form as disinfection byproducts.