Does San Francisco Have Hard Water?
Moderately: San Francisco’s tap water had a reported hardness of 62 mg/L as calcium carbonate (3.6 grains per gallon) in 2025; the reported range was 8.1–112 mg/L (0.5–6.5 grains per gallon), and hardness can vary by area.
How hard is San Francisco’s tap water?
The reported value of 62 mg/L falls just inside the moderately hard category. The reported range spans soft to moderately hard water, so the value at a particular address may differ from the city’s reported value.
Water hardness is commonly expressed as milligrams per liter (mg/L) of calcium carbonate or as grains per gallon (gpg). One grain per gallon equals 17.1 mg/L as calcium carbonate. These standard bands put San Francisco’s reported results in context:
| Classification | Hardness as calcium carbonate |
|---|---|
| Soft | 0–60 mg/L |
| Moderately hard | 61–120 mg/L |
| Hard | 121–180 mg/L |
| Very hard | Above 180 mg/L |
The 2025 range did not extend into the hard category. To compare the result with other cities, see the hard water map by city.
Where does San Francisco’s water hardness come from?
Hardness primarily comes from dissolved calcium and magnesium. Water picks up these minerals as it moves through soil and rock; the amount depends on the water source and its path through the supply system.
Source-water conditions, blending and treatment can affect the hardness of water delivered to customers. San Francisco’s reported range shows that measured tap-water hardness varies, but it does not establish the exact hardness at every address or explain every change in the measurements.
Calcium carbonate is the standard used to express the result. It does not mean that all the hardness minerals are present as visible calcium carbonate deposits in your tap water.
What does hard water do, and is it a health risk?
Hard water is not a health risk. Its most noticeable effects are usually practical: dissolved minerals can form scale when water is heated or evaporates, leaving deposits in kettles, on fixtures or around showerheads.
Hardness minerals can also react with soap, making it harder to produce lather and leaving soap residue. At San Francisco’s reported hardness, experiences may differ: someone near the lower end of the range may notice little buildup, while someone with a higher reading may see more spots or residue.
Some people notice that their skin or hair feels different after washing in harder water. That observation does not establish a medical problem or prove that hardness is the cause. If dryness, itching or a rash persists or worsens, consult a healthcare professional rather than assuming the water is responsible.
Hardness is also not a test for contaminants. If you are concerned about lead or another specific substance, arrange a test for that substance; a hardness result alone cannot tell you whether the water is safe from it.
Should you soften San Francisco’s tap water?
A softener is generally a matter of preference, not a health requirement. With a reported value near the bottom of the moderately hard range, consider whether scale or soap residue is actually causing a problem before buying equipment.
If deposits are bothersome, check the hardness at your own tap first. Our guide to how to test water quality at home explains how to approach testing. A tap-specific result is more useful for choosing equipment than the citywide reported value alone.
An ion-exchange softener reduces hardness minerals, but it needs maintenance and may add sodium to the water. If you have kidney disease, heart failure or a sodium-restricted diet, ask your clinician about regularly drinking softened water. If you are pregnant or preparing infant formula and suspect a contaminant, contact your healthcare professional and water utility for advice and appropriate testing.
A water filter and a softener are not interchangeable. Many pitcher filters are designed for taste or particular contaminants rather than hardness; check a product’s tested reduction claims before choosing one. For options and what they are designed to address, see our guide to the best pitcher water filters.
Where does the hardness data come from?
The figures come from the San Francisco Public Utilities Commission’s 2025 Annual Water Quality Report. It reports tap-water hardness as calcium carbonate, with a value of 62 mg/L and a range of 8.1–112 mg/L.
Those figures describe the utility’s reported measurements, not a guarantee of the reading at a particular faucet. They also describe hardness, not every aspect of drinking-water quality. For a decision about a softener or a suspected contaminant, use a test suited to the question you are trying to answer.
Frequently asked questions
Does boiling San Francisco tap water remove its hardness?
Boiling can reduce some temporary hardness by causing minerals to form deposits, but it is not a reliable way to remove all hardness. It may also leave scale in the kettle.
Does a low total dissolved solids reading mean water is soft?
Not necessarily. Total dissolved solids and hardness measure different things, so a hardness-specific test is better for deciding whether you need a softener.