Does San Diego Have Hard Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, San Diego’s reported treated-water hardness ranged from 54.4 to 285 mg/L as calcium carbonate in 2025, or 3.2 to 16.7 grains per gallon, with hardness varying by area and supply.

That range runs from soft to very hard. The averages for all three city treatment plants were in the very hard category; the average for purchased treated water was hard. For a broader comparison, see the hard water map by city.

How hard is San Diego water?

San Diego’s 2025 Annual Drinking Water Quality Report lists separate hardness results rather than a single citywide average. The table converts the report’s parts per million to mg/L and grains per gallon; figures are rounded to one decimal place.

Treatment plant or supplyAverage hardnessReported range
Alvarado Treatment Plant237 mg/L; 13.9 grains/gal203–270 mg/L; 11.9–15.8 grains/gal
Miramar Treatment Plant242 mg/L; 14.2 grains/gal200–285 mg/L; 11.7–16.7 grains/gal
Otay Treatment Plant243 mg/L; 14.2 grains/gal201–271 mg/L; 11.8–15.8 grains/gal
Purchased treated water145 mg/L; 8.5 grains/gal54.4–232 mg/L; 3.2–13.6 grains/gal

All mg/L values are expressed as calcium carbonate. A plant average is not necessarily the hardness at every tap it serves: supply blends and hardness can change over time. The purchased-water range also shows why one figure cannot describe every part of San Diego.

The purchased treated water average falls in the hard category, but its reported results range from soft to very hard. These categories describe mineral concentration, not compliance with a health-based limit.

Where does San Diego’s water hardness come from?

Hardness comes mainly from dissolved calcium and magnesium. Water picks up these minerals as it moves through rock and soil, and the amount depends on the water source.

San Diego uses a mix of imported and local supplies. Different sources and treatment-plant blends can therefore have different mineral levels. The report’s plant and purchased-water figures show variation in the treated supplies, but they do not identify the exact blend at an individual home.

If you are unsure which utility supplies your address, check your water bill before comparing its results with the city’s report. A neighboring utility can have a different hardness level, even within the greater San Diego area.

What does hard water do, and is it a health risk?

Hard water can leave mineral scale on faucets, showerheads, kettles and water-heating equipment. It can also make soap lather less readily and leave soap residue on dishes, fixtures, skin or hair.

Some people notice that their skin feels dry or their hair feels dull after washing in hard water. Dry skin or dull hair alone does not establish that hardness caused a skin or hair condition.

Hard water itself is not a health risk. Hardness is a measure of calcium and magnesium, not a test for lead, bacteria or other contaminants. A hard-water result alone cannot establish whether a water supply meets every drinking-water standard.

Should you soften San Diego water?

Softening is optional and is mainly a way to address scale and soap performance. If buildup is minor, cleaning fixtures and descaling appliances according to their manufacturers’ instructions may be enough. Check cleaning products against the fixture’s material before using them.

A conventional ion-exchange softener removes calcium and magnesium and replaces them with sodium or, in some systems, potassium. Whole-home systems can reduce scale throughout the plumbing, but they need maintenance and a suitable installation. Ask an installer about local requirements, operating costs and whether a drinking-water tap can bypass the system.

Before buying equipment, consider testing the water at the tap you want to use. If a home already has a softener, comparing a softened tap with an unsoftened tap, if available, can help show whether the system is reducing hardness.

A filter pitcher is not automatically a water softener. Carbon filtration alone generally does not remove much hardness; look for a product that specifically claims and verifies hardness reduction. The guide to the best pitcher water filters can help compare filter features.

Who should be careful?

If you have kidney disease, follow a sodium- or potassium-restricted diet, or use tap water to prepare infant formula, ask a clinician whether softened water is appropriate. See a clinician about persistent skin irritation or concerns after a possible contaminant exposure. Do not assume a softener removes other contaminants unless it is designed and verified to do so.

Where does the hardness data come from?

The figures above are treated-water results in San Diego’s 2025 utility report, not measurements from every household tap. The hardness categories use the USGS bands: soft is 0–60 mg/L, moderately hard is 61–120 mg/L, hard is 121–180 mg/L, and very hard is above 180 mg/L, all as calcium carbonate.

For a home-specific estimate, use a hardness test kit or ask a laboratory to test a cold-water sample. Follow the sampling instructions and check whether the result is in mg/L or grains per gallon before comparing it with the report. Learn more about how to test water quality at home, including when a laboratory test may be useful.

Frequently asked questions

Can boiling San Diego water reduce its hardness?

Boiling can reduce some carbonate hardness, but it does not remove all hardness minerals. It may leave scale inside the kettle or pot.

Is water hardness the same as total dissolved solids?

No. Hardness mainly measures calcium and magnesium, while total dissolved solids include a broader mix of dissolved substances.

Can hard water make ice look cloudy?

Dissolved minerals can contribute to cloudy ice, although trapped air can also make ice look cloudy. Cloudiness alone does not identify a water-quality problem.