Does Paterson Have Hard Water?
Yes, Paterson water can be hard: in 2025, the Little Falls treatment plant reported 106–242 mg/L as calcium carbonate (6.2–14.2 grains per gallon), while purchased Wanaque plant water averaged 42 mg/L (2.5 grains per gallon); hardness varies by area and blending.
How hard is Paterson water?
The Passaic Valley Water Commission’s 2025 water quality data gives figures for separate treatment plants, not one citywide tap-water average. For a broader comparison, see the hard water map by city.
| Reported plant supply | 2025 hardness as calcium carbonate | Grains per gallon |
|---|---|---|
| Little Falls treatment plant | 106–242 mg/L | 6.2–14.2 gpg |
| Purchased Wanaque treatment plant water | 42 mg/L average | 2.5 gpg |
The Little Falls range spans the moderately hard, hard and very hard classifications below. The Wanaque average falls in the soft range. Most customers receive a blend of the two supplies, so neither plant figure alone establishes the hardness at a particular address.
| USGS classification | Hardness as calcium carbonate |
|---|---|
| Soft | 0–60 mg/L |
| Moderately hard | 61–120 mg/L |
| Hard | 121–180 mg/L |
| Very hard | Above 180 mg/L |
The grains-per-gallon figures are calculated using 1 gpg = 17.1 mg/L. The Little Falls range shows the reported endpoints, not how often the water fell into each classification.
Where does Paterson’s water hardness come from?
Hardness mainly comes from dissolved calcium and magnesium. Water picks up these minerals as it moves through soil and rock, and the amount can differ between water sources.
Paterson’s reported plant supplies have different hardness figures. Because most customers receive a blend, the hardness reaching a home depends in part on the proportions and mineral content of the supplies at the time. The report does not give enough information to calculate an exact blended hardness for every neighborhood or tap.
What does hard water do in a home?
Hard water can leave mineral scale on faucets, showerheads, kettles and water-heating equipment. A white film on a fixture or spots on glassware can be a useful clue, although appearance alone cannot tell you the hardness level.
Calcium and magnesium also make it harder for soap to form a lather. Soap residue may be more noticeable on surfaces, skin or hair, and some people may find that their skin or hair feels dry after washing. These effects do not establish a medical condition.
Hard water is not a health risk. Its hardness does not tell you whether the water contains lead or another contaminant; those are separate water-quality questions. If skin irritation persists, is severe or appears infected, contact a healthcare professional rather than assuming hardness is the cause.
Should you soften Paterson water?
A softener is a household preference, not a health requirement. It may be worth considering if mineral scale or soap residue is bothersome, especially after you have measured hardness at your own tap. If you have few problems, cleaning fixtures and appliances as directed by their manufacturers may be enough.
An ion-exchange softener reduces calcium and magnesium, commonly by exchanging them for sodium. If you have kidney disease, heart disease or a medically prescribed sodium restriction, ask your clinician whether softened drinking water is suitable. Keep the equipment maintained according to the manufacturer’s instructions.
A pitcher filter is not automatically a water softener. Some pitchers focus on taste and odor, while others may reduce hardness; check the specific product’s certified claims and capacity. Our guide to the best pitcher water filters explains options to compare.
Where does the hardness data come from?
The figures above come from the Passaic Valley Water Commission’s 2026 Drinking Water Quality Report, which presents 2025 water-quality information. It reports a range for Little Falls and an average for purchased Wanaque water, rather than a single average for all Paterson customers.
To find out what reaches your home, use a hardness test kit and follow its sampling instructions. Check whether the result is expressed in mg/L as calcium carbonate or grains per gallon before comparing it with the table. Our guide to how to test water quality at home covers ways to plan a test.
A hardness test does not establish whether drinking water contains lead or other contaminants. If you are concerned about a specific contaminant, use a test intended for it or contact the utility for guidance.
Frequently asked questions
Is water hardness the same as total dissolved solids?
No. Hardness mainly reflects dissolved calcium and magnesium, while total dissolved solids include a broader group of dissolved substances.
Can boiling make Paterson water soft?
Boiling can reduce some temporary hardness and leave mineral scale in a kettle, but it does not reliably remove all hardness.