Does Moreno Valley Have Hard Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, some water reported for the Mills Service Area, which includes Moreno Valley, was hard or very hard in 2025; reported facility ranges together were 70.1–273.6 mg/L as calcium carbonate (4.1–16.0 grains per gallon), though some water was moderately hard. The Eastern Municipal Water District’s 2025 Water Quality Report lists results by facility rather than one citywide average.

How hard is Moreno Valley’s water?

The reported averages ranged from moderately hard to hard, while individual reported ranges extended into the very hard category. Your address may receive a different blend, so the table is a guide to the service area, not a measurement at every Moreno Valley tap.

FacilityAverage, mg/L as calcium carbonateRange, mg/L as calcium carbonateAverage, grains per gallonRange, grains per gallon
Mills Filtration Plant87.282.1–94.15.14.8–5.5
Desalination Complex107.770.1–152.26.34.1–8.9
Perris Filtration Plant128.280.4–273.67.54.7–16.0

USGS bands classify water as soft at 0–60 mg/L, moderately hard at 61–120 mg/L, hard at 121–180 mg/L, and very hard above 180 mg/L, all expressed as calcium carbonate. The Mills Filtration Plant and Desalination Complex averages were moderately hard; the Perris Filtration Plant average was hard.

These figures do not establish a single average for Moreno Valley. To compare the area with other places, see the hard water map by city.

Where does the hardness come from?

Hardness mainly comes from dissolved calcium and magnesium. Water can pick up these minerals as it moves through soil and rock, and the amount depends partly on the water source and treatment.

Eastern Municipal Water District reports separate results for the Mills Filtration Plant, Desalination Complex and Perris Filtration Plant. Their different averages and ranges show why a single number cannot describe every supply in the Mills Service Area. The water reaching an individual home can vary with its supply and over time.

What does hard water do around the home?

Hard water can leave mineral scale on faucets, showerheads and appliances that heat water. The deposits may appear as white spots on dishes or a ring around fixtures; buildup can also make appliance cleaning more frequent.

Soap may lather less easily in hard water, and residue can be harder to rinse away. Some people notice a coated or dull feeling in their hair or feel that their skin is less thoroughly rinsed. These are practical or cosmetic concerns, not evidence that drinking hard water is a health risk.

Hardness alone does not tell you whether water contains lead or other contaminants. A hardness result and a contaminant test answer different questions, so a softener should not be treated as a general solution for every water-quality concern.

Should you soften Moreno Valley water?

Softening is optional. Consider it if scale, spotting or soap residue is bothersome, especially if a test confirms that the water at your home is hard. A water softener exchanges hardness minerals for other ions; its settings and maintenance matter for how well it works.

Start by checking your own tap rather than choosing a unit solely from the highest number in the district report. Our guide to how to test water quality at home explains ways to check water at the point you use it. Ask the utility about your supply and check local requirements before installing a softener or arranging its discharge.

A pitcher filter is a different choice. Some cartridges are designed to reduce hardness, but many primarily address taste and odor; check the specific cartridge’s claims and capacity. Compare the best pitcher water filters if you want to treat a smaller amount of drinking water rather than water throughout the home.

Who should be careful?

If you have kidney disease or have been advised to limit sodium, ask a clinician whether sodium-softened water is suitable for drinking. If you have persistent or severe skin irritation, see a clinician rather than assuming water hardness is the cause.

Where do the hardness numbers come from?

The figures come from Eastern Municipal Water District’s 2025 report for facilities listed under the Mills Service Area. The report gives hardness in grains per gallon; the mg/L figures shown here use the conversion of 1 grain per gallon to 17.1 mg/L as calcium carbonate.

A facility range describes reported results, not a guarantee that every home experienced both ends of that range. For the most useful number for a particular faucet, test the water there and compare the result with the same USGS bands.

Frequently asked questions

Does boiling remove water hardness?

Boiling can reduce some temporary hardness by causing minerals to form deposits, but it does not reliably remove all hardness.

Can I judge water hardness by taste?

Taste is not a reliable way to measure hardness. A hardness test gives a more useful result.

Is hardness the same as total dissolved solids?

No. Hardness mainly reflects calcium and magnesium, while total dissolved solids includes a broader group of dissolved substances.