Does Distilling Water Remove Bacteria?
Yes, a properly operated distiller removes bacteria from water by boiling it and collecting condensed steam, provided the collected water stays free of contamination. The separation principle is well established, but no studies are cited here to establish an exact bacteria-removal rate for a particular home distiller.
Does distillation make water free of bacteria?
Distillation can remove bacteria because bacteria do not evaporate with water. The steam is cooled back into liquid and collected separately from the original water.
That result depends on the equipment and handling. Droplets of untreated water must not reach the collection side, and the finished water must go into a clean container. For an overview of other approaches, see how to remove bacteria from water.
Distillation is not a guarantee that water will remain bacteria-free indefinitely. Handling the collection container or storing the water improperly can introduce bacteria after treatment.
How does distillation remove bacteria?
A distiller heats water until it boils, directs the steam into a cooling section, and collects the liquid that forms. Most bacteria remain in the boiling chamber rather than traveling with the steam; the heat also inactivates disease-causing bacteria in the water.
The important distinction is between steam and droplets. If untreated water splashes or is carried into the outlet as droplets, it can bypass the intended separation. A damaged, poorly maintained or incorrectly operated distiller may therefore produce less reliable results.
To use a home distiller safely:
- Follow the manufacturer's instructions for filling, operating and maintaining the unit.
- Clean the collection container and the parts the manufacturer identifies, using its recommended method.
- Keep the untreated water separate from the outlet and collection container.
- Store the finished water in a clean, covered, food-grade container, and avoid touching the inside of the container or lid.
Do not assume that a distiller removes every possible contaminant just because it removes bacteria. Some chemicals can travel with steam or require additional treatment. Learn more about what does distilling water remove.
If the source water may contain fuel, solvents or another hazardous chemical, use a known safe water source rather than assuming a home distiller will make it safe.
What percentage of bacteria does distillation remove?
There is no single removal percentage that can be assigned to every distiller and every water source. No study is cited here that measures a specific percentage for a home distiller, so claiming a universal rate—or promising 100% removal—would be misleading.
Performance depends on whether the equipment separates steam from untreated droplets, whether it operates as intended, and whether the collection and storage containers are clean. A percentage measured for one device under particular conditions would not automatically apply to another device.
If you need to verify finished water, use a qualified laboratory and ask about bacteria testing. A test for E. coli, for example, can help identify fecal contamination, but one result does not prove that the water is free of every possible contaminant or that it will stay safe after storage.
What can you use instead of distillation?
The best alternative depends on why the water may be unsafe and what equipment you have. Distillation physically separates water from bacteria; boiling instead makes water safer by inactivating disease-causing organisms.
| Option | How it helps with bacteria | Important limitation |
|---|---|---|
| Sealed bottled water | Provides a ready-to-use source without home treatment | Keep it protected from contamination after opening. |
| Boiling | Inactivates disease-causing bacteria in the water | It does not remove them physically or reliably remove chemical contamination. |
| A bacteria-reduction filter | Can remove bacteria when independently certified for that purpose and used correctly | Certification and maintenance matter; a typical carbon pitcher should not be assumed to remove bacteria. |
For water that needs disinfection, bring it to a rolling boil for 1 minute. At elevations above 6,500 feet (1,981 meters), boil for 3 minutes. Let it cool, then store it in a clean, covered container. If a boil-water advisory is in effect, follow the instructions from your local health or water authority.
Boiling is not the right solution for every hazard: it does not remove fuel or solvents and can concentrate some dissolved contaminants as water evaporates. If chemical contamination is suspected, use a known safe source and follow local guidance.
Infants and people with weakened immune systems may be more vulnerable to illness from contaminated water. If you develop bloody diarrhea, signs of dehydration or a high fever after drinking potentially contaminated water, seek medical advice promptly.
Frequently asked questions
Can bacteria get into distilled water after it is made?
Yes. Bacteria can enter through a contaminated container, lid or handling, so keep distilled water covered and use a clean container.
Does distilled water have to be refrigerated?
Not necessarily. Follow the storage instructions for the water or distiller and keep the water in a clean, covered container; refrigeration does not sterilize it.
Can you tell whether water contains bacteria by looking at it?
No. Clear-looking water can still contain harmful bacteria. Laboratory testing is needed to check for specific bacteria.