What Does Distilling Water Remove?

DetoxWater Editorial Team•Published November 5, 2026

Distillation removes most dissolved salts and minerals, many metals, and disease-causing microorganisms by turning water into vapor and collecting it as liquid again. It can also reduce other contaminants, but it does not reliably remove every chemical.

For broader context on sources and testing, see drinking water quality. What a particular distiller removes depends on the source water, the device's design, and whether contaminants travel into the collected water.

What 8 types of contaminants can distillation remove?

Distillation separates water from many substances that do not readily vaporize. The substances left behind become concentrated in the boiling chamber; they are not necessarily destroyed. The following categories describe what a properly operated distiller can reduce, not a guaranteed result for every device.

1. Dissolved salts and hardness minerals

Distillation leaves most dissolved salts and minerals, including calcium and magnesium, in the boiling chamber. These minerals contribute to water hardness, and their accumulation can form scale on the heating surface.

To reduce them, collect the condensed water rather than the water remaining in the chamber, and clean the chamber as the manufacturer directs. Distilled water may contain less calcium and magnesium than the source water; a varied diet can supply these minerals.

Evidence: The separation of nonvolatile salts is a well-established physical principle. A 2021 study of a solar-powered membrane distillation prototype demonstrated freshwater production from seawater, though it did not test ordinary countertop distillers.

2. Lead, copper and other metals

Many dissolved metals, including lead and copper, do not readily vaporize with water. They generally remain in the boiling chamber, although contaminated droplets can be carried into the collected water if the device is poorly designed or operated.

If you are concerned about a metal, have the source water tested and look for a distiller with an independently verified reduction claim for that metal. Keep the collection container clean and use it as directed so the treated water is not contaminated afterward.

Evidence: The separation principle is established, and a 2024 study of solar-powered distillation found reduced heavy metals in treated domestic wastewater. That study used a particular system and did not establish a lead or copper removal rate for every home distiller.

3. Bacteria, viruses and parasites

Disease-causing microorganisms do not evaporate along with clean water vapor. Heating during distillation also kills many germs, while condensation allows the treated water to be collected separately from the source water.

Use a properly maintained distiller and store the collected water in a clean, covered container. Avoid touching the inside of the container or letting untreated water splash into it; contamination can occur after distillation.

Evidence: Heat treatment and physical separation provide a strong basis for removing microorganisms. The studies we found do not directly establish how well a particular home distiller removes each kind of germ, so check device claims when microbial safety is the concern.

4. Nitrate

Nitrate is commonly present in water as a dissolved ion. It does not readily vaporize with water, so it normally remains in the boiling chamber rather than entering properly collected distilled water.

If a test shows nitrate in a well or another source, choose a device with a verified nitrate-reduction claim and consider testing the treated water. Nitrate left behind becomes more concentrated in the chamber, so discard the remaining source water rather than mixing it with the distilled water.

Evidence: Reduction is supported by the physical behavior of dissolved nitrate, but the studies we found do not give a nitrate-removal result for a home distiller. The EPA drinking water limit is 10 mg/L as nitrogen; check the units used on a laboratory report before comparing results.

5. Fluoride

Fluoride in drinking water is typically present as a dissolved ion that does not readily pass into clean water vapor. Distillation can therefore substantially reduce it, along with other dissolved substances.

Use a distiller with a verified fluoride-reduction claim if fluoride removal is your goal. Because distillation also reduces fluoride added to community water supplies, people concerned about their dental health can discuss their fluoride needs with a dentist.

Evidence: Fluoride reduction has a sound basis in the separation of nonvolatile dissolved ions. The studies we found do not measure fluoride reduction in a particular countertop distiller, so they cannot establish its performance.

6. Arsenic

Arsenic occurs in water in different chemical forms. Common dissolved inorganic forms generally do not readily vaporize with water, so distillation can leave much of that arsenic in the boiling chamber.

If arsenic is a concern, test the source water and select a distiller with an independently verified claim for arsenic reduction. Test the treated water when you need to confirm the result, especially for a private well where the owner is responsible for water testing.

Evidence: The expected reduction is based on the behavior of common dissolved arsenic forms; the studies we found do not establish a home distiller's arsenic-removal rate. The EPA limit for arsenic in regulated public drinking water is 0.010 mg/L.

7. Sediment and suspended particles

Sand, silt and other suspended particles do not turn into water vapor. They normally remain in the boiling chamber, leaving the collected distilled water clearer than the source water.

Allow the distiller to operate without overfilling it, which can help prevent source-water droplets and particles from being carried into the collection vessel. Clean accumulated residue from the chamber according to the manufacturer's instructions.

Evidence: Physical separation of suspended matter is a straightforward principle. The 2024 wastewater study cited above observed reductions in suspended matter, but its system and source water differed from those of a typical household distiller.

8. Certain PFAS, including PFOA and PFOS

PFOA and PFOS are PFAS that generally exist as dissolved ions in water and do not readily vaporize with it. Distillation can reduce them, but droplets carried into the collection vessel or contamination after collection can affect the result.

If PFAS reduction is important, look for an independently verified claim naming the specific PFAS you want to reduce. Do not assume that a device tested for PFOA and PFOS has been tested for every PFAS; some other PFAS-related compounds can be more volatile.

Evidence: There is a physical basis for separating nonvolatile PFAS, but the studies we found do not directly test PFOA or PFOS removal by home distillers. A product-specific claim or a laboratory test of the treated water is more useful than a general claim about distillation.

What can distillation leave in water?

Some volatile chemicals can enter the vapor and end up in the collected water. Their behavior depends on the chemical and the device; a substance does not have to boil below water's boiling point to enter water vapor. Distillation alone is therefore not a reliable blanket solution for solvents, fuel-related chemicals or all other volatile contaminants.

Some distillers include a carbon filter or another treatment stage intended to reduce certain chemicals. Check the independently verified claims for the complete system and replace any filter on the manufacturer's schedule. A carbon stage does not guarantee removal of every volatile chemical.

Distillation also cannot protect water from a dirty collection container, contaminated tubing or handling after treatment. Do not heat water suspected of containing fuel or other hazardous chemicals without advice from your water supplier or local health authority.

How can you check what a distiller removes?

Start with a water test or a report from your water supplier so you know which substances matter. Then check the distiller's certification listing for those specific reduction claims, rather than relying on a general description such as “purifies water.” Certification to NSF/ANSI 62 is one way to check whether a distiller has been independently evaluated; review the listing for the claims it actually covers.

Follow the manufacturer's operating, cleaning and filter-replacement instructions. If you need confirmation for a specific contaminant, arrange for an appropriate laboratory test of the collected water. A low reading on a total dissolved solids meter can indicate that many dissolved substances have been reduced, but it cannot identify every contaminant or prove the water is safe.

Frequently asked questions

Is distillation the same as deionization?

No. Distillation vaporizes and condenses water, while deionization uses ion-exchange materials to remove charged substances.

Why can distilled water taste flat?

Distillation removes much of the dissolved mineral content that contributes to the taste of the source water. Taste alone does not establish whether water is safe.

Sources

  1. Solar-powered single-stage distillation and complex conductivity analysis for sustainable domestic wastewater treatment. Environmental science and pollution research international (2024). PubMed 38573575
  2. Solar Seawater Distillation by Flexible and Fully Passive Multistage Membrane Distillation. Nano letters (2021). PubMed 34043366