Does Denver Have Hard Water?
Moderately: Denver’s tap water was reported at about 105 mg/L as calcium carbonate, or 6.1 grains per gallon, in 2025. The reported range was 55–124 mg/L, or about 3.2–7.3 grains per gallon; hardness varies by area and can change over time.
Is Denver’s tap water hard?
Denver’s reported value of 105 mg/L falls in the moderately hard category. The range crosses three categories, from soft at the low end to hard at the high end, so the overall result may not describe every Denver tap. See the hard water map by city to compare Denver with other locations.
| USGS category | Hardness as calcium carbonate |
|---|---|
| Soft | 0–60 mg/L |
| Moderately hard | 61–120 mg/L |
| Hard | 121–180 mg/L |
| Very hard | More than 180 mg/L |
Grains per gallon is another way to express hardness: 1 grain per gallon equals 17.1 mg/L as calcium carbonate. Denver’s reported range therefore represents noticeably different levels of hardness, even though its reported value is moderate.
Where does Denver’s water hardness come from?
Water hardness comes mainly from calcium and magnesium dissolved in water as it moves through rock and soil. Denver Water identifies erosion of natural deposits as the source of the hardness it reports.
The amount of dissolved mineral material can vary with water sources and supply conditions. Water at an individual tap can also differ from the utility’s reported value, particularly if the home has a water softener or other treatment equipment. A home test can give you a more useful number for a decision about your own fixtures or appliances.
What does Denver’s water hardness do?
Hard water can leave a white or chalky mineral deposit when water evaporates or is heated. You might notice it on faucets, shower doors, kettles or other surfaces. A reading near the top of Denver’s reported range may make scale more noticeable than a reading near the bottom, although cleaning habits and appliance use matter too.
Calcium and magnesium can also react with soap, making it harder to produce lather and leaving soap residue on surfaces. Some people notice that their skin or hair feels dry or coated after washing. Those sensations alone do not establish that hardness is causing a skin condition.
Hard water is not a health risk. Hardness describes minerals in water; it does not by itself tell you whether water contains lead, microorganisms or another contaminant. If skin irritation is persistent or severe, see a clinician rather than assuming the water is responsible.
Should you soften Denver’s water?
Not necessarily. At Denver’s reported moderate level, a softener is generally a choice based on scale, cleaning and appliance needs, not a health requirement. If deposits are minor, wiping wet fixtures dry and cleaning scale according to the appliance manufacturer’s instructions may be enough.
If scale is a recurring problem, test your water before buying equipment. Our guide to how to test water quality at home explains how to check water at your tap. A hardness test is different from a contaminant test, so choose a test that answers the question you have.
A conventional ion-exchange softener reduces hardness minerals, but it may add sodium to the water; some systems use potassium instead. People with kidney disease or a medically prescribed sodium or potassium restriction should ask their clinician whether softened drinking water is appropriate. Parents preparing infant formula can also ask a clinician about their water and follow the formula manufacturer’s instructions.
A softener is not a substitute for testing for specific contaminants or following a drinking-water advisory. Likewise, do not assume that every pitcher filter softens water: check the product’s claims and certification for the substance you want to reduce. Our guide to the best pitcher water filters covers pitcher options.
Where do the Denver water hardness numbers come from?
The figures come from Denver Water’s 2026 Water Quality Report, which lists a 2025 total-hardness result and range. Its reported result of 105,009 parts per billion is approximately 105 mg/L; the reported range of 55,000–124,000 parts per billion is 55–124 mg/L.
The report describes Denver Water’s supply, not necessarily every water system in the wider metro area. If another utility serves your address, check its report or contact it for local hardness information. For the closest answer to what reaches a particular faucet, use a tap-water hardness test and note whether any home treatment is in operation.
Frequently asked questions
Does boiling Denver tap water soften it?
Boiling can cause some hardness minerals to form deposits, but it does not reliably remove all hardness. It is not a practical substitute for a softener if you need to reduce hardness throughout a home.
Is water hardness the same as total dissolved solids?
No. Hardness mainly reflects calcium and magnesium, while total dissolved solids include a broader range of dissolved substances. A total-dissolved-solids reading cannot by itself tell you the water’s hardness.