Does Boiling Water Remove Bacteria?
Yes, bringing water to a rolling boil for the recommended time inactivates disease-causing bacteria by damaging their proteins and cell structures.
Is boiling water enough to make it safe from bacteria?
Boiling is a reliable way to disinfect water that may contain common disease-causing bacteria. It does not physically remove the bacteria: heat makes them unable to cause infection, while their remains stay in the water.
Water can contain harmful bacteria even when it looks, smells and tastes normal. If your water supplier issues a boil-water advisory, follow its instructions until the advisory is lifted. For other approaches, see how to remove bacteria from water.
Boiling addresses a biological hazard, not every water-quality problem. If the water may contain fuel, toxic chemicals or other hazardous substances, use a known safe source instead; boiling can concentrate some contaminants as water evaporates.
How does boiling water kill bacteria?
Heat damages structures bacteria need to survive and reproduce. A rolling boil also gives you a visible indication that the water has reached the temperature needed for the recommended disinfection process.
The time matters, especially at higher elevations, where water boils at a lower temperature. Use these steps for water you suspect may contain bacteria:
- Prepare the water. If it is cloudy, let particles settle and pour off the clearer water, or pass it through a clean cloth, paper towel or coffee filter. This step does not disinfect the water.
- Bring the water to a rolling boil in a clean pot. A rolling boil has vigorous bubbles across the surface.
- Keep the water at a rolling boil for 1 minute. At elevations above 6,500 feet (about 2,000 meters), boil it for 3 minutes.
- Let the water cool naturally. Keep it covered while it cools, and handle the pot carefully to avoid burns.
- Store the cooled water in a clean, sanitized container with a tight-fitting lid. Use clean utensils to dispense it, and avoid putting hands or used cups into the water.
Use the treated water for drinking and food preparation as directed by local officials. If you are under a boil-water advisory, follow its instructions even when using a household water filter; ordinary filters do not necessarily remove bacteria.
Boiled water can become contaminated again through a dirty container, utensil or hands. Do not add ice made from water whose safety is uncertain.
What percentage of bacteria does boiling remove?
There is no single removal percentage that applies to every sample of boiled water. Results depend on the organisms present and whether all the water reaches a rolling boil for the recommended time. A percentage also suggests physical removal, whereas boiling primarily inactivates bacteria.
The recommended process is intended to make water safe from common disease-causing microorganisms, but it should not be described as removing every bacterial particle or guaranteeing that every possible contaminant is gone. Some bacterial spores can resist heat, and boiling does not reliably eliminate bacterial toxins or chemical contaminants.
For the broader limits of this method, see what does boiling water remove.
What can you use instead of boiling water?
Choose an alternative based on the suspected problem and local health advice. If a public advisory specifies a method, follow that advice rather than assuming another treatment is equivalent.
| Option | When it can help | Important limitation |
|---|---|---|
| Sealed bottled water | Provides drinking water when the source is known to be safe | Check for a specific recall or local warning affecting the product. |
| A water-disinfection product | Can treat water for bacteria when boiling is impractical | Follow the label for the amount and contact time. It may not be effective against every type of microorganism and does not remove chemicals. |
| A filter certified to remove bacteria | Can be useful when selected and maintained for that purpose | Check the certification and instructions; a filter that removes bacteria may not remove viruses or chemicals. |
Do not rely on a standard taste-improving pitcher filter as proof that water is free of bacteria. Filters need correct installation and maintenance, and their effectiveness depends on what they are certified to remove.
If chemical contamination is suspected, use bottled water or another source approved by your local health authority. A disinfectant or bacteria-rated filter alone should not be assumed to make that water safe.
Frequently asked questions
Can an electric kettle be used to disinfect water?
Yes, if it can keep the water at a rolling boil for the recommended time. A kettle that switches off as soon as it boils may not do that.
Does freezing water kill bacteria?
Freezing is not a reliable way to disinfect water. Boil it as directed or use another suitable treatment.
Should water be reboiled if it may have been contaminated after cooling?
If the concern is bacterial contamination, boil it again for the recommended time and transfer it to a clean, sanitized container. Use a different safe source if chemical contamination is also suspected.