Does Aurora Have Hard Water?
Yes, Aurora, Colorado, had hard tap water in 2025, with a reported hardness of 136 mg/L as calcium carbonate, or 8.0 grains per gallon. The reported range was 87–198 mg/L (5.1–11.6 grains per gallon), and hardness can vary by area. Compare other locations on our hard water map by city.
Does Aurora have hard tap water?
Aurora’s reported 2025 hardness of 136 mg/L falls in the hard category. The City of Aurora’s 2026 Water Quality Report also lists a range spanning moderately hard to very hard water.
| Reported 2025 result | Hardness as calcium carbonate | Grains per gallon | Classification |
|---|---|---|---|
| Reported value | 136 mg/L | 8.0 | Hard |
| Low end of range | 87 mg/L | 5.1 | Moderately hard |
| High end of range | 198 mg/L | 11.6 | Very hard |
The classifications use USGS bands: soft is 0–60 mg/L, moderately hard is 61–120 mg/L, hard is 121–180 mg/L, and very hard is above 180 mg/L. The grains-per-gallon figures are rounded conversions, using 17.1 mg/L per grain per gallon.
The range does not tell you which result applies to a particular address. Your tap water may differ from the reported value, especially if your home has a water softener or another treatment device.
Where does Aurora’s water hardness come from?
Hardness comes mainly from dissolved calcium and magnesium minerals. As water moves through natural deposits, it can pick up these minerals before it reaches the water system.
Aurora’s report identifies erosion of natural deposits as the source of its reported hardness. The amount of dissolved minerals can vary with the water being supplied; the report does not assign a separate hardness value to every neighborhood.
Hardness is a measure of mineral content, not a measurement of all substances in the water. A hardness result alone cannot tell you whether a tap has a particular contaminant.
What does Aurora’s hard water do?
Hard water can leave scale, a chalky mineral deposit, on faucets, showerheads, kettles and other surfaces where water dries or is heated. It can also leave spots on dishes and glassware. Regular cleaning and following appliance manufacturers’ descaling instructions can help manage buildup.
Soap may lather less readily in hard water, and soap residue can collect on bathroom surfaces. Some people also notice a different feel or residue on their skin and hair after washing. These effects do not mean the tap water is unsafe to drink: hard water itself is not a health risk.
If you have eczema or sensitive skin, use products that do not irritate your skin and speak with a clinician if irritation persists or worsens. The mineral content alone does not establish the cause of a skin problem.
Should you soften Aurora’s water?
You do not need to soften Aurora’s water for health reasons. A softener is a practical choice if scale, spotting or soap performance is troublesome enough to justify the purchase, installation and maintenance.
A conventional ion-exchange softener replaces calcium and magnesium with sodium or potassium. It needs periodic maintenance and regeneration to keep working. If you have kidney disease or follow a sodium-restricted diet, ask a clinician or dietitian whether sodium-softened water is appropriate for you to drink; a separate unsoftened drinking-water tap may be an option where the plumbing permits it.
A pitcher filter is not automatically a water softener. Some filters are designed for taste or specific contaminants, while some use media that can reduce hardness. Check the product’s independently certified claims and replacement instructions; our guide to the best pitcher water filters can help you compare options.
Neither a softener nor a pitcher should be assumed to remove every contaminant. Choose treatment based on the specific issue you want to address, rather than on hardness alone.
Where do Aurora’s hardness numbers come from?
The figures come from the City of Aurora’s 2026 Water Quality Report and describe its 2025 water-quality data. The report lists hardness as calcium carbonate, a standard way to express the combined effect of hardness minerals. In water, the report’s parts-per-million figures correspond approximately to mg/L.
The city reports a value of 136 mg/L and a range of 87–198 mg/L. Those figures are useful for understanding the system, but they are not a test of your individual faucet.
For a household-specific result, use a hardness test kit or arrange a laboratory test. Our guide explains how to test water quality at home. Test before and after a softener if you want to check how much hardness it removes.
Frequently asked questions
Is 136 mg/L of hardness the same as 136 ppm?
For a water report, 136 mg/L is approximately 136 parts per million. Both describe hardness expressed as calcium carbonate.
Does boiling Aurora tap water remove hardness?
Boiling can cause some hardness minerals to form scale, but it does not reliably remove all hardness. It is not a substitute for a water softener.
Does hard water mean Aurora tap water contains lead?
No. Hardness measures minerals such as calcium and magnesium, not lead. A specific lead test is needed to assess lead at a tap.