Does Ann Arbor Have Hard Water?
Yes, Ann Arbor reported hard tap water at 126 mg/L as calcium carbonate, or 7.4 grains per gallon, in 2025.
How hard is Ann Arbor’s tap water?
The City of Ann Arbor’s 2025 Water Quality Report lists a hardness value of 126 mg/L and a range of 74–180 mg/L, expressed as calcium carbonate. That range is approximately 4.3–10.5 grains per gallon. See the hard water map by city to compare Ann Arbor with other locations.
Under the US Geological Survey classification, 126 mg/L is hard. The reported range extends from moderately hard at its lower end to hard at its upper end. The citywide figures do not establish what a particular tap will measure on a particular day.
| Classification | Hardness as calcium carbonate |
|---|---|
| Soft | 0–60 mg/L |
| Moderately hard | 61–120 mg/L |
| Hard | 121–180 mg/L |
| Very hard | More than 180 mg/L |
Where does Ann Arbor’s water hardness come from?
Hardness comes mainly from dissolved calcium and magnesium. As water moves through soil and rock, it can pick up these minerals; the amount in finished tap water also depends on the water source and any treatment used.
Hardness is expressed as calcium carbonate so measurements can be compared using a common scale. That expression does not mean all the dissolved minerals in the water are calcium carbonate.
What does hard water do around the home?
Hard water can leave mineral scale on faucets, showerheads, kettles and other surfaces where water evaporates or is heated. Scale can also build up inside water-using equipment, making cleaning or maintenance more important.
It can make soap less effective at lathering and leave soap residue on dishes, laundry, skin or hair. Skin or hair may feel dry or look dull after washing, although those effects can have other causes too. Rinsing and removing buildup may help with residue.
Hard water is not a health risk. A hardness reading also does not tell you whether water contains lead, bacteria or another contaminant. Testing for a specific contaminant requires an appropriate test; hardness alone is not a measure of overall drinking-water safety.
Should you soften Ann Arbor’s water?
Softening is a personal and household choice, not a health requirement. It may be worth considering if scale, soap residue or appliance maintenance is a persistent problem. If those effects are minor, cleaning fixtures and following appliance-maintenance instructions may be enough.
A conventional ion-exchange softener reduces calcium and magnesium by exchanging them for sodium or potassium. Check the product’s specifications and maintenance requirements, and size it using a current hardness measurement at your tap rather than relying only on the citywide figure.
Not every filter softens water. Some pitchers are designed primarily for taste or odor, while others may reduce hardness minerals. When comparing the best pitcher water filters, check the specific model’s certified reduction claims; a pitcher that improves taste does not necessarily prevent scale.
Who should be careful?
People on a sodium-restricted diet or with kidney disease should ask a clinician or dietitian about softened drinking water, especially before choosing a sodium- or potassium-exchange system. An unsoftened cold-water tap may be an option for drinking where the home’s plumbing permits it.
If a child or adult has persistent skin irritation, consult a healthcare professional rather than assuming hardness is the cause. A softener is not a substitute for testing or treatment when a specific contaminant is a concern.
Where does the hardness data come from?
The figures above come from the City of Ann Arbor’s 2025 Water Quality Report, which lists the reported tap-water hardness value and range in parts per million as calcium carbonate. For this water measurement, parts per million are effectively equivalent to mg/L. Grains per gallon are calculated using 1 grain per gallon = 17.1 mg/L.
The report is useful for understanding the citywide picture, but a home measurement is more useful when setting a softener or investigating local scale. Learn how to test water quality at home and choose a test that specifically measures hardness. Follow its sampling instructions and compare the result with the units required by your equipment.
Frequently asked questions
What hardness setting should I enter into a water softener?
The 2025 reported value of 7.4 grains per gallon is a starting reference, not a substitute for measuring your own tap water. Follow the softener manufacturer’s instructions when setting the unit.
Does boiling Ann Arbor tap water soften it?
Boiling can cause some hardness minerals to form scale, but it is not a reliable way to soften water throughout a household.
Is bottled water always softer than Ann Arbor tap water?
No. Bottled-water mineral content varies by product, so check the label or the manufacturer’s water-quality information.