What Does a Water Softener Remove?

DetoxWater Editorial Team•Published November 5, 2026

A water softener removes calcium and magnesium and can reduce dissolved iron; some models can also reduce dissolved manganese.

A conventional water softener targets the minerals that cause hard water, not every substance that affects drinking water quality. Its performance depends on the water supply, the resin, the equipment settings and maintenance.

What 4 substances can a water softener remove?

1. Calcium

Calcium is a major cause of hardness and the scale that can build up in pipes, water heaters and fixtures. In a conventional water softener, calcium ions attach to a resin and are exchanged for sodium or potassium ions.

To reduce calcium, test the incoming water for hardness, size the water softener for the household and set it according to the manufacturer’s instructions. Keep the unit supplied with the recommended regenerant so the resin can be restored when needed.

Evidence strength: Calcium removal by ion exchange is an established treatment mechanism. No studies are cited here to quantify the performance of a particular water softener.

2. Magnesium

Magnesium is the other principal hardness mineral. Like calcium, its ions bind to the softener resin and are replaced with sodium or potassium ions, reducing the water’s tendency to form scale.

A hardness test generally reports the combined effect of calcium and magnesium, so use that result when selecting and setting a water softener. Test the treated water as well if you want to check whether the unit is working as intended.

Evidence strength: Magnesium removal by ion exchange is an established treatment mechanism. The amount removed by an individual unit depends on its settings, condition and incoming water.

3. Dissolved iron

Some water softeners can reduce dissolved, or ferrous, iron through ion exchange. This form of iron may be present in water that initially looks clear; iron that has already formed visible rust particles is a different treatment problem.

Test for iron and check the manufacturer’s stated iron-treatment conditions before relying on a water softener. Iron can foul resin, and a separate iron treatment system may be needed, particularly when the water contains particles or the iron level exceeds the softener’s specified capability.

Evidence strength: Iron reduction is possible under suitable conditions, but it is not guaranteed by every water softener. No studies are cited here to establish a general removal rate.

4. Dissolved manganese

Some water softeners can also exchange dissolved manganese ions for sodium or potassium ions. As with iron, treatment depends on the form of the manganese, the water chemistry and the equipment; manganese that has formed particles may need a different treatment approach.

Have the water tested for manganese and ask whether the specific water softener is designed for the measured conditions. If the manufacturer does not claim manganese reduction for those conditions, do not assume the unit will provide it.

Evidence strength: Removal is conditional on the water and system. No studies are cited here to quantify manganese reduction by a particular water softener.

How does a water softener work?

A conventional water softener passes water through a tank containing ion-exchange resin. Calcium and magnesium ions stick to the resin while sodium or potassium ions are released into the water. This exchange reduces hardness; it does not make every dissolved substance disappear.

As the resin becomes loaded, the unit regenerates it using a concentrated salt solution, then rinses it before returning to service. Depending on the system, regeneration may be triggered by water use, a timer or another control. Follow the manufacturer’s instructions for the salt type, settings and upkeep.

Some products described as salt-free water conditioners work differently. They may be intended to change how hardness minerals form scale rather than remove calcium and magnesium, so check the product’s treatment claim rather than assuming it is an ion-exchange water softener.

What does a water softener not reliably remove?

A standard water softener is not a general-purpose drinking water filter or disinfectant. Even if a substance can interact with a resin, that does not establish that a particular water softener consistently removes it to a safe level.

Substance or concernWhat to know
Lead and copperDo not rely on a standard water softener as a certified lead or copper treatment. These metals can also enter water from plumbing downstream of the softener.
Arsenic, nitrate and fluorideA standard water softener is not a reliable treatment for these contaminants. They require treatment selected for the specific substance and water chemistry.
PFAS, pesticides and other organic chemicalsA water softener is not a substitute for a device certified to reduce the specific contaminant of concern.
Chlorine and chloramineA standard water softener is not designed primarily to remove disinfectants or their taste and smell.
Bacteria and virusesA water softener does not reliably disinfect water or make microbiologically unsafe water safe to drink.
Total dissolved solidsSoftening exchanges ions rather than removing all dissolved salts, so it should not be treated as a total dissolved solids removal system.

If a test identifies a contaminant, choose treatment for that result rather than assuming that softer water is safer water. Look for an independent certification covering the particular contaminant and check the device’s installation and maintenance requirements.

How hard is the water before and after softening?

Hardness is commonly reported in milligrams per liter as calcium carbonate, written as mg/L as CaCO3. The following US Geological Survey categories describe hardness, not whether water is safe to drink.

ClassificationHardness, mg/L as CaCO3
Soft0–60
Moderately hard61–120
Hard121–180
Very hardMore than 180

A water utility may provide a hardness result, or you can test the water entering your home. For a private well, a laboratory test can also help identify iron, manganese or other concerns that may affect the choice of treatment.

Compare an incoming-water sample with a sample taken after the water softener. Use the same type of test and follow its sampling instructions. A lower hardness result after treatment indicates that the unit is reducing hardness, but it does not show whether unrelated contaminants have been removed.

How do you choose and maintain a water softener?

Start with the incoming water test and the household’s water use. Select a water softener with enough capacity for those conditions, and check its stated limits for iron and manganese if either is present. Ask the installer which fixtures will receive softened water and whether an untreated bypass will remain available.

Keep the regenerant tank supplied as directed, check for alerts or settings that have changed, and arrange service when the manufacturer recommends it. A loss of capacity, an empty salt tank, a bypass valve left open or a fouled resin bed can all leave the water harder than expected.

If scale returns or a post-treatment test shows rising hardness, check the settings and salt supply before assuming the resin needs replacement. For persistent problems, have the system and incoming water assessed by a qualified water treatment professional.

Who should be careful with softened drinking water?

A sodium-cycle water softener adds sodium in exchange for hardness minerals; a potassium-cycle unit adds potassium instead. The amount depends on the incoming water and treatment, so ask for water testing or an estimate rather than assuming the contribution is negligible.

People on a sodium-restricted diet should ask their clinician whether softened water fits their needs. People with kidney disease, those advised to limit potassium and those taking medicines that affect potassium should also ask before choosing a potassium-cycle water softener. An unsoftened drinking-water tap is an option only if that water is otherwise suitable for drinking.

If testing identifies a health-related contaminant, use an appropriate alternative source or treatment and contact the water utility or local health department for guidance. Consult a clinician about individual health concerns; a hardness result alone cannot diagnose a health problem.

Frequently asked questions

Does boiling water remove hardness?

Boiling can reduce some temporary hardness by causing minerals to form deposits, but it does not reliably remove all hardness. It is not a substitute for a properly selected water softener.

What do grains mean on a water softener label?

Grains can describe water hardness or a water softener’s rated exchange capacity, depending on the label. Rated grain capacity is not the same as the number of gallons the unit can treat.

Why can softened water feel slippery?

Soft water contains less of the calcium and magnesium that react with soap. The different feel does not by itself mean that the water softener is malfunctioning.