Is Tap Water Safe to Drink in Park City?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the Park City Water System has no health-based violations reported in the last 3 years.

What does Park City’s tap water record mean?

The EPA record shows no health-based violations for the Park City Water System during that period. It also reports no lead action-level exceedances. That record describes the water system, not every building’s pipes or the water at a particular tap.

EPA testing has detected some PFAS chemicals in the system, including results above the numerical limits set for two of them. Individual results do not by themselves establish a compliance violation. For broader comparisons, see tap water safety by state.

Who supplies Park City’s water, and where does it come from?

The main system listed for visitors is the Park City Water System, a local government-owned utility whose primary source is surface water. Its public water system identification number is UTAH22011, and the EPA record lists 8,875 people served.

If you are staying in Park City, ask your lodging provider which system serves the property. The Park City Water System’s record does not establish conditions for a property served by a different system or a private well.

What does the EPA violation record show?

The following is the EPA record for the Park City Water System, retrieved November 3, 2026.

MeasureReported result
People served8,875
Health-based violations in the last 3 yearsNone
Current open violationsNone reported
Lead action-level exceedances in the last 3 yearsNone reported
Quarters with violations in the last 120

The record lists no rules violated during the 3-year period. The current quarter is marked undetermined, so the record is not a substitute for the utility’s current notices. A monitoring or reporting violation, if one occurs, means a test or paperwork was missed or late; it does not by itself mean the water was contaminated.

What did PFAS testing find?

PFAS are a group of chemicals sometimes called “forever chemicals.” In EPA’s UCMR 5 national survey, the Park City Water System was sampled from March 18, 2024, through March 17, 2025. EPA has set limits of 4.0 parts per trillion (ppt) each for PFOA and PFOS.

ChemicalSamples with detectionsHighest resultEPA limit
PFOA4 of 184.8 ppt4.0 ppt
PFOS4 of 186.7 ppt4.0 ppt

Both maximum results were above their respective numerical limits. However, compliance is assessed using running annual averages, not a single sample or the maximum result alone. These survey results therefore do not establish whether the system is currently out of compliance.

The survey also detected PFBS in 5 of 18 samples, with a maximum of 4.3 ppt. GenX, PFNA and PFHxS were not detected in any of their 18 samples, at reporting limits of 5.0 ppt, 4.0 ppt and 3.0 ppt, respectively.

For PFOA and PFOS, the reporting limit was 4.0 ppt. A result reported as not detected does not necessarily mean the chemical was absent. Ask the utility for its latest water quality report and notices for current information.

Could lead come from household plumbing?

Lead can enter tap water from plumbing or fixtures in a building. No reported system-level lead action-level exceedance in the last 3 years does not guarantee that every tap is free of lead.

EPA’s lead action level is 15 parts per billion (ppb), or 0.015 milligrams per liter (mg/L); its health goal for lead is zero. If you are concerned about a particular tap, a drinking-water test can provide information the utility-wide record cannot. Use cold tap water for drinking and cooking; boiling does not remove lead.

Can you use the water for ice, brushing teeth and washing produce?

With no current advisory affecting your address, most people can use tap water for making ice, brushing teeth and washing produce. Check the utility’s current notices as well as any information from your lodging provider, because the EPA record cannot establish conditions inside a particular building.

If an advisory is in effect, follow its specific instructions for each use. Boiling does not remove lead or PFAS.

What if you want extra protection?

Ask the utility how to have water from your tap tested, and use a laboratory certified for drinking-water testing. Tell the lab which substances concern you, such as lead, PFOA or PFOS, so it can recommend the appropriate test and sampling instructions.

If you choose a filter, look for independent certification under NSF/ANSI Standard 53 or 58 for reduction of the specific substances you want to address. Check the product’s certification details and follow its cartridge replacement instructions; not every filter reduces every contaminant.

Pregnant people, families with infants or young children, and people with weakened immune systems can ask a clinician whether they need additional precautions. If you suspect exposure to lead or another contaminant, contact a clinician to discuss whether health testing or other follow-up is appropriate.

Where does the information come from?

The violation and system details come from the EPA ECHO drinking water report for the Park City Water System, retrieved November 3, 2026. The PFAS results come from EPA’s UCMR 5 occurrence data, in a file dated October 15, 2026.

These sources describe reported system data and past samples. Consult the utility’s annual water quality report and current notices for the latest local details.

Frequently asked questions

Is bottled water required in Park City?

The EPA record does not establish a general requirement to use bottled water. Check current utility notices and consider conditions at your specific tap.

Can taste or smell tell me whether tap water contains lead or PFAS?

No. Water can look, taste and smell normal and still contain contaminants. Testing is needed to determine what is in a particular sample.

What does parts per trillion mean?

Parts per trillion is a way to express a very small concentration. In water, 1 part per trillion is approximately 1 nanogram per liter.