Is Tap Water Safe to Drink in Nantucket?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Wannacomet Water Company and Siasconset Water Department had no health-based violations in the last 3 years, though both had monitoring or reporting violations involving missed or late tests or paperwork, not proof of unsafe water.

What does the Nantucket tap water verdict mean?

The EPA record supports a yes for the two public water systems serving Nantucket, with an important qualification: neither system had a health-based violation in the last 3 years, but both had monitoring and reporting violations. A missed test or late report does not establish that water was contaminated, although it can leave a gap in the information available.

The record describes the public water systems, not every individual tap. Check the utility’s current notices and annual water quality report, particularly before visiting; for a broader comparison, see tap water safety by state.

Who supplies Nantucket’s water, and where does it come from?

Wannacomet Water Company is the main system for visitors. Siasconset Water Department is another public system in Nantucket. Both are owned by local government and use groundwater as their primary source.

If you are staying in a rental or hotel, ask the host or property manager which system serves the building and whether any current water notice applies. A property with a private well is not covered by either system’s EPA record in the table below.

What violations did EPA record in the last 3 years?

The following summary uses EPA’s drinking water records retrieved on November 3, 2026. “Open violations” are those listed as current in the retrieved record; contact the utility for their current status and details.

SystemPeople servedHealth-based violations, last 3 yearsOpen violations listedLead action-level exceedances, last 3 years
Wannacomet Water Company27,703NoneLead and Copper Rule; Consumer Confidence RuleNone reported
Siasconset Water Department3,000NoneConsumer Confidence RuleNone reported

EPA recorded violations in 7 of the last 12 quarters for each system. The listed violation categories include monitoring and reporting, as well as other violations. The record does not establish that every listed open violation resulted from the same issue.

The Lead and Copper Rule concerns requirements for controlling and monitoring lead and copper in drinking water. The Consumer Confidence Rule concerns annual water quality reports. The names of the rules alone do not explain the specific open violations; consult the utility’s notices and annual report for details.

What did PFAS testing find?

PFAS are sometimes called “forever chemicals.” EPA’s UCMR 5 program was a national survey scheduled for 2023–2025; the Wannacomet Water Company results in the occurrence data cover sampling from January 28, 2025, to May 12, 2026.

SubstanceWannacomet Water Company resultReporting limitEPA limit
PFOANot detected in 6 samples4.0 parts per trillion (ppt)4.0 ppt
PFOSNot detected in 6 samples4.0 ppt4.0 ppt

A result reported as not detected does not mean the concentration was necessarily zero. EPA has set limits of 4.0 ppt for PFOA and PFOS; these survey results are not, by themselves, a compliance determination, which is based on running annual averages.

Siasconset Water Department was not included in the available UCMR 5 results. That is not a finding that PFAS are present or absent. See the EPA UCMR 5 occurrence data and ask the utility for its latest results.

Could lead come from household plumbing?

Yes. A system’s record does not rule out lead entering water from a building’s own service line, plumbing or fixtures. Neither system had a lead action-level exceedance reported in the last 3 years, but that does not guarantee the result at an individual tap.

EPA’s lead action level is 15 parts per billion for utility compliance sampling; its health goal for lead is zero. Ask the utility or property owner about the service line and arrange a tap-water test if you are concerned. Use cold water for drinking and cooking, and follow the utility’s guidance on running the tap after water has stood in the plumbing.

Children and pregnant people should be particularly cautious about possible lead exposure. If you are concerned about exposure, contact a healthcare professional for advice about testing. Do not boil water to remove lead: boiling does not remove it and can concentrate it.

Can you use the tap water for ice, brushing teeth and washing produce?

When there is no applicable local notice restricting use, the public-system record does not indicate a reason to treat these everyday uses differently from drinking. Use drinking-quality water to make ice, brush teeth and rinse produce; freezing does not purify water.

If a boil-water or do-not-use notice is issued, follow its specific instructions for each use and use an alternative supply when directed. Boiling is not a way to remove lead or PFAS.

How can you get extra protection?

Start by identifying your water system and checking its latest notices. For a question about a particular tap, use a qualified drinking water laboratory and follow its sampling instructions; the utility can help you find testing information.

If you choose a filter, look for independent certification to NSF/ANSI Standard 53 or 58 for the specific contaminant you want to reduce, such as lead or PFOA and PFOS. Check the product’s certified claims and replace cartridges according to the manufacturer’s instructions. A filter is not a substitute for following a utility notice.

Where does the information come from?

The violation and system details come from EPA’s Safe Drinking Water Act records in its ECHO reports for Wannacomet Water Company and Siasconset Water Department, retrieved November 3, 2026. PFAS results come from EPA’s UCMR 5 occurrence data file dated October 15, 2026.

These records are a snapshot, not a substitute for current notices. Ask the relevant utility for its latest annual water quality report and any updates affecting your address.

Frequently asked questions

What does a part per trillion mean?

A part per trillion describes one part of a substance in one trillion parts of the measured material. PFAS results in drinking water are commonly reported in parts per trillion, abbreviated ppt.

Does clear, good-tasting water guarantee there is no lead?

No. Appearance and taste cannot establish whether lead is present. A laboratory test can help determine the lead level at a particular tap.