Is Tap Water Safe to Drink in Myrtle Beach?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Myrtle Beach City of had no health-based violations in the last 3 years, although it had monitoring and reporting violations that do not by themselves prove the water was unsafe.

That verdict applies to the utility’s record, not necessarily to a particular building’s plumbing. For a broader comparison, see tap water safety by state.

What does the Myrtle Beach tap water verdict mean?

The EPA record distinguishes health-based violations from monitoring and reporting violations. The latter concern missed or late tests or paperwork; they are not, on their own, evidence that the water was contaminated.

The record also includes PFAS detections discussed below. A record without health-based violations does not mean every contaminant was absent or that conditions inside every building are known. Check the utility’s current notices and annual water quality report for the latest information.

Who supplies Myrtle Beach’s water, and where does it come from?

The main system listed for visitors is Myrtle Beach City of, a local-government-owned utility identified by the public water system ID SC2610001. Its primary source is purchased surface water.

A hotel, rental or address in the wider Myrtle Beach area may not necessarily be served by this system. Ask the property manager or check the water bill or utility serving the address before applying this record to your location.

What does the EPA violation record show?

The following summarizes the EPA record for Myrtle Beach City of over the last 3 years.

Record itemResult
People served49,375
Health-based violationsNone reported
Open violationsRevised Total Coliform Rule listed as a current violation; the count is not specified
Lead action-level exceedancesNone reported

The record lists violations in 3 of the last 12 quarters and identifies 2 rules violated. Its violation categories are monitoring and reporting, and reporting violations.

The listed contaminants and rules include total haloacetic acids, or HAA5, and total trihalomethanes, or TTHM. Both are disinfection byproducts. The Revised Total Coliform Rule is also listed; consult the utility’s notices and annual report for current details rather than assuming a cause or resolution from the record alone.

What did PFAS testing find?

PFAS are a group of chemicals often called “forever chemicals.” EPA’s fifth Unregulated Contaminant Monitoring Rule, or UCMR 5, is a one-time national survey generally described as covering 2023–2025. The Myrtle Beach City of results list a sampling period from November 25, 2024, through January 20, 2026.

PFASDetectionsHighest reported resultEPA limit
PFOA1 of 4 samples5.3 parts per trillion (ppt)4.0 ppt
PFOS2 of 4 samples5.3 ppt4.0 ppt

Both maximum results were above EPA’s respective 4.0 ppt limits. A maximum sample result alone does not establish a compliance violation: compliance is based on running annual averages, and these results do not establish that calculation.

The survey also reported detections of PFHxS and PFBS. PFNA and HFPO-DA, also known as GenX, were not detected at the reporting limits; “not detected” does not mean the concentration was necessarily zero. The results describe sampled utility water, not necessarily the concentration in every glass at every moment.

What about lead and household plumbing?

No lead action-level exceedances were reported for the system in the last 3 years. That finding does not rule out lead from a particular home’s service line, plumbing or fixtures.

EPA’s lead action level is 15 parts per billion (ppb), while its health goal for lead in drinking water is zero. An action level is not a guarantee that an individual tap has no lead. If you are concerned about your building, ask the utility or a qualified laboratory about a tap-water lead test.

Can you use the water for ice, brushing teeth and washing produce?

The utility record does not establish a general restriction on these uses. If a current notice applies to your address, follow its specific instructions for drinking, making ice, brushing teeth and washing produce; advice can depend on the issue covered by the notice.

For lead concerns, use cold tap water for drinking and food preparation. Ask the utility for its recommendations on running the tap, and consider testing if you do not know the condition of the building’s plumbing.

How can you get extra protection?

Start by confirming your water supplier and checking its current notices. If you want information about your own tap, ask about a laboratory test suited to your concern: a lead test and a PFAS test measure different things.

A filter can provide extra protection when it is independently certified for the specific contaminant you want to reduce. Check the certification and product instructions for lead, PFOA or PFOS as relevant, and replace cartridges as directed. Boiling water is not a substitute for a filter that reduces lead or PFAS.

Who should be careful, and when should you see a doctor?

People who are pregnant, parents preparing infant formula, and people with conditions that weaken the immune system can ask a healthcare professional about their individual needs and check the utility’s current guidance. Contact a healthcare professional if you are concerned about a possible exposure or symptoms; seek prompt care for severe symptoms or signs of dehydration, especially in a child.

Where does this information come from?

The utility and violation information comes from the EPA ECHO detailed facility report for Myrtle Beach City of, facility ID 110008557891, retrieved November 3, 2026. It reflects the utility record, not a test of individual household pipes.

The PFAS figures come from EPA’s UCMR 5 occurrence data, in a file dated October 15, 2026. For current conditions at a particular address, consult the serving utility’s notices and annual water quality report.

Frequently asked questions

What does ppt mean in a PFAS result?

Ppt means parts per trillion, a unit used to express very small concentrations. In water, 1 ppt is approximately 1 nanogram per liter.

Does clear-looking tap water guarantee it is free of contaminants?

No. Appearance alone cannot establish whether contaminants such as lead or PFAS are present; an appropriate laboratory test can provide more information.

Can visitors choose bottled water instead?

Yes. Visitors who prefer it can use bottled water, and they should follow any current utility notice that applies to their location.