Does Reverse Osmosis Remove PFAS?

DetoxWater Editorial Team•Published November 5, 2026

Yes, a properly selected and maintained reverse osmosis system can remove PFAS from drinking water by forcing water through a membrane that rejects many PFAS molecules.

Does reverse osmosis work for PFAS?

Reverse osmosis can reduce PFAS in water, but the result depends on the specific PFAS compounds, the system and how well it is maintained. We found no treatment studies, so research has not established a universal removal percentage.

Choose a system with an independently verified reduction claim for the PFAS you are concerned about, install it as directed and replace its components on schedule. Laboratory testing of the treated water is the most direct way to check its performance at your home.

For an overview of treatment choices and testing, see how to remove PFAS from water. If your water utility or health department has issued advice about PFAS in your supply, follow that advice while you evaluate treatment options.

How does reverse osmosis remove PFAS?

A reverse osmosis system uses water pressure to push water through a semipermeable membrane. The membrane allows water to pass while rejecting many dissolved substances, including many PFAS. The rejected substances leave in a separate, more concentrated waste stream; the process does not destroy PFAS.

A typical under-sink system treats water at a dedicated faucet. It may also include prefilters and a storage tank, but the reverse osmosis membrane is the main barrier for reducing dissolved PFAS. An under-sink system does not automatically treat water at every other tap in the home.

The membrane’s condition matters. Incorrect installation, damaged components, fouling or missed replacements can affect performance. Follow the manufacturer’s instructions for installation, flushing, maintenance and replacement, and check that the system is operating within its specified water-pressure and temperature range.

If you want to reduce PFAS in water used for drinking and cooking, use the treated faucet for both. Also check whether an ice maker or other appliance is connected to the treated supply rather than assuming it is.

What percentage of PFAS does reverse osmosis remove?

There is no single percentage that applies to every reverse osmosis system and every PFAS compound. A manufacturer or independent certification listing may report a reduction for a particular model under specified test conditions, but that result is not a guarantee of the same reduction in your home.

Compare systems using these details:

  • The exact model and claim: Look for independent certification to NSF/ANSI 58 with a specific PFAS reduction claim. Certification to the standard alone does not mean every PFAS is covered.
  • The compounds tested: Check whether the claim names the PFAS in your water. A claim for PFOA or PFOS does not establish the same result for every other PFAS.
  • Test conditions: Incoming concentrations, water conditions and the state of the membrane can affect the result.
  • Maintenance requirements: Check which components need replacement and whether the manufacturer specifies a service schedule.

EPA has set drinking-water limits of 4.0 parts per trillion (ppt) each for PFOA and PFOS. These are limits for those individual compounds in regulated drinking water, not a blanket limit for every PFAS or a guaranteed result for a home filter.

To check a system’s performance, ask a qualified laboratory about testing both the incoming water and water from the treated faucet for the relevant PFAS. Follow the laboratory’s sampling instructions and use its recommended containers. Compare the results for each compound; a result below the laboratory’s reporting limit does not prove that no PFAS are present.

A total dissolved solids meter cannot tell you whether PFAS have been removed. It measures an overall water characteristic, not the concentration of individual PFAS.

What can you use instead of reverse osmosis?

Granular activated carbon and ion exchange are alternatives that can reduce certain PFAS, but their performance also depends on the compounds, product and maintenance. Look for an independently verified, PFAS-specific reduction claim for the exact device or treatment media you plan to use.

Boiling is not a substitute: it does not remove PFAS and can concentrate them as water evaporates. If contamination is known or suspected, contact your water utility or local health department for guidance and use a drinking-water source verified for the relevant PFAS while you arrange testing or treatment.

Frequently asked questions

Can you taste or smell PFAS in drinking water?

Taste and smell are not reliable ways to detect PFAS. A laboratory test is needed to measure specific PFAS in water.

Does a reverse osmosis system need electricity?

Some systems operate using water pressure, while others use an electric pump. Check the specifications for the model you are considering.