Does Reverse Osmosis Remove Chlorine?
Yes, a reverse osmosis system can remove chlorine when it has a properly maintained activated-carbon prefilter, which reduces chlorine before water reaches the membrane. For a broader comparison of options, see how to remove chlorine from water.
Does reverse osmosis remove chlorine from drinking water?
A reverse osmosis system with an activated-carbon prefilter can reduce chlorine, but the carbon stage—not the reverse osmosis membrane—is usually responsible for that reduction. The result depends on the filter design, its condition, and the water passing through it.
There is no single chlorine-removal percentage that applies to every reverse osmosis system. Check the certified chlorine-reduction claim for your specific model, follow its replacement schedule, and test the water if you need to verify performance at home.
Chlorine is commonly added to public drinking water to control microorganisms. The US Environmental Protection Agency’s maximum residual disinfectant level for chlorine is 4 mg/L; this is a regulatory limit, not a target that a home filter must achieve.
How does reverse osmosis treatment remove chlorine?
In a typical system, tap water first passes through a sediment filter and an activated-carbon prefilter. The carbon reacts with free chlorine and reduces it before the water reaches the reverse osmosis membrane. Some systems also have a carbon filter after the membrane to improve taste and odor.
The membrane works differently: water is pushed through it under pressure, while a portion of the incoming water carries away rejected substances. The membrane’s main job is not chlorine removal. Many common reverse osmosis membranes can be damaged by chlorine, so protecting them with the correct prefilter matters as well as improving the finished water’s taste.
A carbon postfilter is not a substitute for a working carbon prefilter when the membrane needs protection. If your system has no prefilter or you are unsure whether it is suitable for chlorinated water, check the manufacturer’s instructions before using it.
Also check whether your water supplier uses chlorine or chloramine. Chloramine is a different disinfectant, and a filter’s chlorine-reduction claim does not automatically mean it will reduce chloramine. Choose a product with a specific chloramine-reduction claim if that is what your water contains.
What percentage of chlorine does reverse osmosis remove?
There is no reliable universal percentage for chlorine removal by reverse osmosis systems. The percentage for a particular setup depends largely on its carbon filter, the incoming chlorine level, water flow and contact time, and whether the filter has reached its replacement point.
| What you check | What it tells you |
|---|---|
| A product-specific certified chlorine-reduction claim | How the product performed under the conditions of its certification test |
| The rated filter capacity and replacement instructions | When the manufacturer says the filter should be changed |
| A before-and-after chlorine test | An indication of performance on your water at the time of testing |
Look for certification to NSF/ANSI 42 with a specific chlorine-reduction claim. Certification to a standard alone does not mean a product is certified for every reduction claim covered by that standard. Check the exact model and replacement cartridge as well as the stated claim.
To estimate reduction at home, use a test suitable for free chlorine in drinking water and compare untreated tap water with water from the system. If the starting reading is above zero, subtract the treated reading from it, divide the result by the starting reading, and multiply by 100 to express the result as a percentage. A home test is a snapshot, not a substitute for certified performance testing; results near the test’s detection limit may be difficult to interpret.
If your supplier uses chloramine, a free-chlorine test alone will not tell you how much chloramine remains. Use a test appropriate for the disinfectant you want to measure, and follow the test instructions.
What can you use instead of reverse osmosis for chlorine?
If chlorine taste or odor is your main concern, a certified activated-carbon pitcher, faucet filter, or under-sink filter may be a simpler choice than a full reverse osmosis system. Look for the specific chlorine-reduction claim, check that the filter fits your water use, and replace the cartridge as directed.
A carbon filter does not do everything a reverse osmosis system can do. If you also want to reduce another substance, check for a separate certified claim for that substance rather than assuming chlorine reduction covers it.
Keep the filter housing and any storage container clean, and follow the manufacturer’s installation and maintenance instructions. Once chlorine has been reduced, the filtered water has less disinfectant residual, so it is important to avoid introducing contamination during storage.
Do not assume that a chlorine filter or a standard reverse osmosis system makes microbiologically unsafe water safe to drink. If your water source is unsafe or subject to a boil-water advisory, follow your local health authority’s instructions rather than relying on the filter alone.
Frequently asked questions
How can I find out whether my tap water contains chlorine or chloramine?
Check your water supplier’s drinking water report or contact the supplier. The disinfectant used and its concentration can change, so the report may not reflect the exact level at your tap.
Why does filtered water still smell like chlorine?
The carbon cartridge may need replacement, the filter may not be rated for your water use, or the odor may have another cause. Check the instructions and use an appropriate test rather than relying on smell alone.
Can I use reverse osmosis on untreated well water?
Have the well water tested and choose treatment for the substances or microorganisms found. Do not assume a standard reverse osmosis unit provides adequate disinfection; follow local health guidance and the system manufacturer’s requirements.