How to Test for PFAS in Your Body

DetoxWater Editorial Team•Published November 5, 2026

A PFAS blood test can measure selected PFAS in your blood, with the process from arranging the test to receiving results taking days to weeks or longer, depending on appointments and the laboratory.

A result can inform a conversation about exposure, but it does not remove PFAS. For that separate question, see how to remove PFAS from your body.

What is a PFAS blood test?

A PFAS blood test measures the concentrations of selected per- and polyfluoroalkyl substances, or PFAS, in a blood sample. A laboratory typically analyzes serum or plasma, which are portions of the blood prepared after collection. Routine blood counts and standard chemistry panels do not measure PFAS.

PFAS are a large group of chemicals, and a test measures only those included in its panel. Some PFAS can remain in the body for years, so a result may reflect exposure over time rather than a recent event. It cannot identify every PFAS you have encountered, measure the total amount in every organ, or establish exactly when or where exposure occurred.

A PFAS concentration is not a diagnosis. Even when a result is elevated relative to a reference population, it cannot tell you whether PFAS caused a particular symptom or whether you will develop a disease.

How do you get tested for PFAS?

  1. Discuss your exposure with a clinician. Ask whether a PFAS blood test would be useful in your circumstances and how the result might affect your care. Mention possible exposure through your workplace, drinking water or another known source, along with relevant health concerns. A clinician or occupational health service can also help you decide whether routine health checks are appropriate.

  2. Choose a suitable test and laboratory. Ask for a serum or plasma PFAS panel and check which chemicals it measures. Different panels may include different PFAS, so results from two panels are not necessarily directly comparable. Confirm whether a clinician's order is required, where the sample will be collected, whether the laboratory is appropriately accredited for the test, and what the test and any appointment will cost. Insurance coverage may vary.

  3. Confirm the collection instructions. Ask the laboratory whether you need to prepare for the test and whether any other tests will be collected at the same visit. Follow its instructions rather than assuming that preparation for a different blood test applies. Tell the collection staff about medications, a bleeding disorder or previous fainting during blood draws; do not stop prescribed medication unless your clinician directs you to do so.

  4. Give the blood sample. Have a trained professional collect the sample at the laboratory or another approved collection site. The sample is sent for analysis, and the laboratory should be able to provide an expected turnaround time. Ask how you will receive the report and whom to contact if it is delayed.

  5. Review the report with your clinician. Check the name and concentration of each PFAS measured, the units, and any laboratory notes about detection limits or reference values. A result below a laboratory's detection limit does not prove that you have never been exposed or that no PFAS are present in your body. Reference values can help put a result in context, but they do not by themselves diagnose illness or establish a safe level for an individual.

  6. Decide on any follow-up. Discuss the result alongside your exposure history and usual health risks, not in isolation. Your clinician can advise whether routine screening or another evaluation is appropriate and whether repeating the PFAS test would answer a useful question. If a workplace or local water supply is a suspected source, an occupational health service or local health department may be able to help investigate the exposure separately.

PFAS are not heavy metals, and the heavy metal detox tool cannot test for PFAS or interpret a PFAS blood result.

How often should you test for PFAS?

There is no single repeat-testing schedule that fits everyone, and not everyone needs a PFAS blood test. Whether another test is worthwhile depends on the reason for testing, whether exposure is ongoing, which PFAS were measured and whether a new result would change a decision about exposure or medical care.

Discuss the timing with your clinician rather than ordering tests repeatedly on your own. If you do repeat a test, keep the earlier report and ask whether the same laboratory, sample type and panel should be used. Differences in the chemicals measured, laboratory methods or reporting units can make results harder to compare.

A change in a result does not necessarily identify what caused the change. Your clinician can help interpret it in light of the test methods and any changes in possible exposure.

What are the benefits of PFAS testing?

A blood test can show whether selected PFAS are detectable and provide measured concentrations for the chemicals on the panel. For someone with a known or suspected exposure, that information may help a clinician discuss exposure history, appropriate follow-up and the limits of what the result means.

Testing can also provide a starting point for a later comparison if a clinician recommends one. Its usefulness depends on having a clear reason for testing and a plan for interpreting the result. The test itself does not reduce PFAS in the body, prevent illness or predict an individual's future health.

If you suspect an ongoing source of exposure, ask your clinician or local health department how to investigate it. A blood result alone cannot establish whether your current drinking water or another particular source contains PFAS; that source would need to be assessed separately.

Who should be careful, and when should you see a doctor?

Speak with a clinician before testing if you are pregnant or breastfeeding, are arranging testing for a child, or have a significant suspected workplace or environmental exposure. These situations can involve different considerations for testing and follow-up. Do not use a result to make changes to a child's care or to pregnancy-related care without medical advice.

Tell the person collecting your blood if you have a bleeding disorder, take blood-thinning medication or have previously fainted during a blood draw. A blood draw can cause brief pain or bruising, and some people feel lightheaded. A clinician can help you weigh the test's likely usefulness against its costs, limitations and potential to cause worry or prompt unnecessary follow-up.

Avoid relying on an unvalidated home, hair or urine test as a substitute for an appropriate blood test. Be cautious of products claiming to remove PFAS based on your result; a test result does not establish that such a product is effective.

Stop the blood draw and tell the collector if you feel faint or develop significant pain. Seek urgent medical attention for bleeding that will not stop, chest pain or trouble breathing; do not wait for a PFAS result. Do not stop a prescribed medication because of a test result.

Try the free tool

Heavy Metal Detox →

Frequently asked questions

Can drinking water limits be used to interpret a PFAS blood result?

No. Drinking water limits apply to concentrations in water, not blood. Ask your clinician to interpret your blood report using the appropriate context.

Can I collect a PFAS test sample at home?

Some companies offer home collection, but the sample methods and PFAS panels vary. Ask a clinician whether the specific collection method and laboratory are suitable before relying on the result.

Are PFAS the same as heavy metals?

No. PFAS are a group of manufactured chemicals, not heavy metals. A heavy-metal test does not measure PFAS.