pH of Distilled Water: Why It Changes
The pH of distilled water is 7.0 pH units when pure at 25 °C, but it is often approximately 5.5–6.0 pH units after exposure to air. Air exposure, temperature, dissolved substances and the measurement method can all affect the result. Use the water ph calculator to explore the relationship between pH and hydrogen-ion concentration.
A lower pH after air exposure does not by itself mean distilled water is unsafe. For the broader drinking-water question, see is distilled water good for you.
How does the pH of distilled water compare?
The table shows approximate values at 25 °C. The air-exposed value is an illustration, not a guaranteed reading for every container of distilled water.
| Condition | Approximate pH | Approximate hydrogen-ion concentration |
|---|---|---|
| Pure distilled water | 7.0 | 1 × 10⁻⁷ mol/L |
| Distilled water exposed to air | 5.6 | 2.5 × 10⁻⁶ mol/L |
| Another possible air-exposed reading | 6.0 | 1 × 10⁻⁶ mol/L |
At 25 °C, a pH below 7.0 is acidic, 7.0 is neutral, and a pH above 7.0 is alkaline. Pure distilled water is neutral because it has equal amounts of hydrogen and hydroxide ions, not because it has no ions at all.
The pH scale is logarithmic: a decrease of 1 pH unit corresponds to approximately ten times the hydrogen-ion concentration. In the table, pH 5.6 represents roughly 25 times the hydrogen-ion concentration of pH 7.0, although both concentrations are small. That ratio does not describe the water’s total acidity or its ability to resist a pH change.
What changes the pH of distilled water?
Exposure to air
Carbon dioxide from air dissolves in distilled water and forms carbonic acid, which lowers the pH. How far the pH falls depends on factors such as the carbon dioxide level, contact with air and other substances in the water.
A freshly opened container and a sample left standing in an open glass may therefore give different readings. Exposure takes time, so a reading is not necessarily the final value the sample would reach in contact with air.
Temperature
The pH of neutral pure water is 7.0 specifically at 25 °C. As temperature changes, water’s natural balance of hydrogen and hydroxide ions changes too, so neutral pure water does not always have a pH of exactly 7.0.
Temperature can also affect how much carbon dioxide dissolves and how a meter responds. Record the sample temperature when comparing readings, and follow the meter manufacturer’s instructions for temperature compensation.
Dissolved substances and containers
Distillation removes many dissolved substances, but distilled water can pick up material after production. Residue in a glass, storage container or measuring equipment can shift a reading upward or downward, depending on what dissolves.
Distilled water has little buffering capacity, meaning it does not strongly resist a change in pH. Use a clean container and avoid touching or adding anything to the sample before measuring it.
Measurement method
Accurate measurement can be difficult because distilled water has very low electrical conductivity. An ordinary pH electrode may respond slowly or produce an unstable reading, while a color strip may be hard to interpret precisely.
For a more reliable measurement, use a meter and electrode suited to low-conductivity water. Calibrate with fresh standard buffer solutions as directed by the manufacturer, rinse the electrode, and limit unnecessary exposure of the sample to air. Note that testing an air-exposed sample answers a different question from testing pure water protected from air.
How can you calculate the pH of distilled water?
The calculator linked above can help you work through the relationship shown in the table. For a very dilute solution, an estimate uses pH = −log₁₀[H⁺], where [H⁺] is the hydrogen-ion concentration in mol/L. More precisely, pH is defined using hydrogen-ion activity, which is close to this concentration-based estimate in very dilute water.
For example, a hydrogen-ion concentration of approximately 1 × 10⁻⁷ mol/L gives an estimated pH of 7.0. A calculation describes the sample represented by the value entered; it cannot determine whether distilled water has absorbed carbon dioxide or picked up residue. To find the pH of a particular sample, measure it under controlled conditions.
Try the free tool
Water Ph Calculator →Frequently asked questions
Can pH prove that water was distilled?
No. Different waters can have the same pH, and distilled water’s pH can change after it is exposed to air or other substances.
Can distilled water calibrate a pH meter?
It is not a substitute for the standard buffer solutions specified by the meter manufacturer. Its pH can change with air exposure, and its low conductivity makes measurement difficult.
Will boiling distilled water bring its pH back to 7.0?
Boiling can remove some dissolved carbon dioxide, but it does not guarantee a pH of 7.0. The water can absorb carbon dioxide again as it cools and contacts air, and neutral pH also depends on temperature.