How to Make Distilled Water at Home
You can make distilled water at home in about 1–2 hours, including cooling, by collecting steam that condenses on a chilled pot lid. This is an estimate for a small batch; the amount collected and cooling time depend on your equipment.
Distilled water has fewer dissolved minerals than the water it starts with, but homemade distilled water is not guaranteed to be sterile or free of every contaminant. For more on drinking it, see is distilled water good for you.
What is distilled water?
Distilled water is water that has been heated into vapor and then cooled back into liquid. During distillation, many dissolved minerals and salts stay behind in the original water rather than traveling with the vapor.
Distilling is different from simply boiling water. Boiling heats the water in the pot; distilling also collects the condensed vapor in a separate container. The liquid left in the pot is not the distilled water.
The home method is not a reliable test or treatment for every water-quality problem. Some chemicals can travel with steam, and collected water can be contaminated by equipment, splashes or storage containers. Start with water that is already safe to drink.
How do you make distilled water on the stove?
The method below uses an inverted metal lid to direct condensed droplets into a bowl. Choose equipment that fits together securely before turning on the heat: the bowl needs to stay upright, and the lid needs to sit on the pot without being sealed or locked.
What you need
- Water: About 2 cups (475 mL) of water already safe to drink, or an amount that fits your pot while staying below the collection bowl.
- Ice: About 1 cup (240 mL) of ice cubes to start; have extra available as needed.
- A large stainless-steel pot and a clean metal lid that fits when inverted.
- A clean, heat-safe bowl small enough to sit inside the pot without touching the lid.
- A stable, heat-safe rack to support the bowl inside the pot.
- Oven mitts and a clean, food-grade storage container with a lid.
Use a metal lid rather than placing ice on a hot glass lid, which could crack from the temperature change. Check that the underside of the lid and the bowl are clean, since condensed water will touch them.
Steps
- Set the rack in the pot and place the empty bowl securely on it. Center the bowl beneath the point where water will drip from the inverted lid. It should not rock, float or touch the lid.
- Pour the water into the pot around the rack, keeping the water level below the bowl and low enough that it cannot splash into the bowl. The water in the bowl at the end must come from condensation, not from the pot.
- Invert the metal lid over the pot so its center slopes toward the bowl. Leave it resting on the pot rather than locking or sealing it. Check that the lid is stable and that any condensation can drip into the bowl.
- Heat the pot until the water produces steam, then reduce the heat to maintain a gentle simmer. A vigorous boil can splash source water into the collection bowl and cause the pot to run dry sooner.
- Place ice on the outside of the inverted lid. The cold lid helps steam condense on its underside, where droplets can run toward the center and fall into the bowl. Keep the melted ice from overflowing into the pot.
- Watch the pot throughout the process and add ice carefully as needed. If you need to check the water level or bowl, turn off the heat and let the steam subside before cautiously lifting the lid with oven mitts. Keep your face and hands away from escaping steam.
- Stop heating when you have collected enough water, or sooner if the water in the pot is getting low. Never let the pot boil dry, and never leave it unattended on the stove.
- Let the pot, lid and bowl cool completely. Use oven mitts if any part is still warm, and avoid tipping the bowl into the water left in the pot.
- Transfer the collected distilled water from the bowl into the clean storage container and close it. Discard the water left in the pot; it is not the collected distilled water.
Yield varies with the pot, lid, heat and collection setup, so the starting amount does not tell you how much distilled water you will collect. If the lid does not direct droplets into the bowl, stop and adjust the equipment after it has cooled rather than trying to force a sealed fit.
For a pH calculation, try the water ph calculator. A pH reading alone cannot establish whether distilled water is pure or safe to drink.
How often should you make or drink distilled water?
Make distilled water when you need it; there is no required schedule. A small batch is easier to handle and store, but it may not produce much collected water.
There is also no special requirement to drink distilled water instead of other safe drinking water. Choose the water that fits your needs, and follow a clinician’s advice if you have been given an individual fluid plan.
Keep homemade distilled water in a clean, closed, food-grade container. Refrigeration can help maintain quality, but it does not sterilize the water. Discard it if the container becomes contaminated or the water develops cloudiness or an unusual smell; contamination is not always visible or detectable by smell.
What are the benefits of distilled water?
Distilled water provides hydration, just as other safe drinking water does. Its lower mineral content can also be useful when you specifically want water with fewer dissolved minerals, although a home batch has not been verified to meet a particular purity standard.
There is no evidence that drinking distilled water gives the body a special detox benefit. The liver and kidneys do most of the body’s detoxification, while the lungs and gut also help eliminate waste. Drinking enough water supports normal body functions; distilled water is not a cleanse.
What are the risks, and who should be careful?
The immediate risks are burns from the stove, hot equipment and escaping steam. Keep children and pets away from the work area, use oven mitts, and allow the equipment to cool before moving it. Never use a sealed or locked vessel for this method, because pressure can build up.
Do not use this setup to treat water known or suspected to contain fuel, solvents or other chemicals. Heating contaminated water can release hazardous vapors, and some contaminants may carry over into the collected water. Follow local water-safety advice instead.
People preparing infant formula should follow the formula instructions and their child’s health professional’s advice about water and preparation; homemade distilled water should not be assumed to be sterile. For medical equipment or procedures, use water that meets the manufacturer’s or clinician’s instructions rather than assuming a home batch meets the required standard.
Stop if the pot is nearly dry, the bowl tips, equipment cracks, source water splashes into the bowl, or you notice an unexpected chemical smell. Turn off the heat if it is safe to do so and let the equipment cool; do not use questionable collected water. For a burn, cool the area under cool running water and seek urgent medical care for a serious or extensive burn.
Try the free tool
Water Ph Calculator →Frequently asked questions
Can I make distilled water with an ordinary kettle?
A kettle by itself boils water but does not collect and cool the steam, so the water left inside is not distilled water. A purpose-built distiller is designed to collect the condensed vapor.
Why can distilled water taste flat?
Distillation removes many dissolved minerals that contribute to the taste of water. Taste alone cannot confirm whether water has been distilled or whether it is safe.
Is distilled water the same as purified water?
Distillation is one way to purify water. Other purification methods exist, so water labeled purified is not necessarily distilled.